What are some strategies for understanding and completing homework problems?

  • Thread starter Thread starter TeaWay
  • Start date Start date
  • Tags Tags
    Stuck
AI Thread Summary
The discussion focuses on solving a physics problem involving momentum and impulse related to a tennis ball. The initial momentum of the ball is calculated as 1.75 kg*m/s, while the final momentum is determined to be 2.1 kg*m/s, leading to a change in momentum of 0.35 kg*m/s. The impulse on the ball is equal to this change in momentum. For calculating the average force applied by the racquet, the formula used is impulse divided by the time of contact, which is 0.020 seconds. The participant expresses uncertainty about their calculations but seeks clarification and support for further homework problems.
TeaWay
Messages
9
Reaction score
0
Momentum..initial & final & impulse.

a 70g tennis ball coming towards you at 25 m/s is hit with a tennis racquet and goes away from u at 30 m/s

A) what is the initial momentum of the tennis ball?
B) what is the final momentum of the ball ?
C) what is the change in momentum of the tennis ball ?
D) what was the impulse on a tennis ball
E) what was the average force applied by the raquet on the ball if it made contact with the ball for 0.020 seconds ?

a) initial momentum = 0.070kg x 25 m/s
=1.75 kg x m/s

b)final momentum = 0.070kg x 30 m/s
=2.1 kg x m/s

c) change in momentum = 2.1 kg x m/s - 1.75 kg x m/s
= 0.35 kg x m/s

d) impulse = F(change in time) = change in momentum

impulse = 0.35 kg x m/s

i don't know if i did it right but i got stuck on "E"
 
Last edited:
Physics news on Phys.org
If the initial momentum is positive, then the final momentum must be negative because it is in the opposite direction. At least for calculating the change.

For (e) use F*Δt = m*Δv = Δp
 
sorry if i might ask a lot of questions >< . I am a bit slow.. lol

so if i change the final momentum to a negative i get..

final momentum = -3.85 kg*m/s

but for question " E "

how do i find the average force.?

is it like

impulse/ Δt = f i don't know if I am doing this correctly.
 
impulse/ Δt =
yes!
 
Delphi51 said:
yes!

YAY ! ty ty :D ! but then i have a lot more questions i have to ask about my other homework problems.. usually i stay after school to get help and understand the concepts and whatnot but i didn't have time to get to go through problems i need help with ; - ;.. sorry for the extra info that wasn't need . i just wanted to to feel like I'm not a complete idiot asking sooo many questions :\ .
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top