What Are the Steps to Calculate Vc, Vb, and Ve in a Transistor Circuit?

  • Thread starter Thread starter dawsonss
  • Start date Start date
  • Tags Tags
    Transistor
AI Thread Summary
To calculate Vc, Vb, and Ve in a transistor circuit, it's essential to clearly define the problem and provide relevant details. The discussion highlights the importance of understanding the voltage divider configuration and its impact on the transistor's operation. The quiescent point has been calculated, and simulations suggest it is accurate. Participants emphasize the need for a clear statement of the problem to facilitate effective assistance. Basic knowledge of transistor parameters is assumed for accurate calculations.
dawsonss
Messages
2
Reaction score
0
transistor problem, helpp!

[PLAIN]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/270474_2182563849439_1407242959_2536426_5250645_n.jpg

how to answerr? thanks
 
Last edited by a moderator:
Engineering news on Phys.org


Im sorry but 90% that no one here understands that language. And please make a CLEAR statement what is the problem. I cannot conclude from the picture what's going on, and even if I could, you still should have typed in the problem.

Its the least you can do if you are already asking for help, giving a clear statement what seems to be a problem.
 


sorry language problems, edited my questions..

http://www.hizliupload.com/img/81836689442763213204.jpg
 


I calculated the quiescent point for your transistor. It should be ok, my simulations confirmed this somewhat.

In first 2 steps what I did is I split the voltage divider into 2 sources powering transistor on their own. This doesn't change anything in problem.

Also I flipped the picture. So emitter is bottom now.

You are asking Vc, Vb, Ve. I think you should have this basic knowledge of figuring out these parameters from these results.

bass
 

Attachments

Thread 'Why does the amperage go real high if there is a low voltage short?'

I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
View full post »
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'

Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'

I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
View full post »

Similar threads

Why does a transistor in saturation act like a short circuit?
Replies
5
Views
4K
Calculating Values for PN2222A LED Circuit
Replies
5
Views
3K
How is the circuit above biased for temperature stabilization?
Replies
12
Views
3K
Pnp transistor with base connected to collector
Replies
5
Views
4K
How Can Vector Analysis Improve Understanding of Mechanics Problems?
Replies
34
Views
4K
How to Solve This Complex Current Electricity Circuit Problem?
Replies
9
Views
3K
What is the Solution to this Rotational Motion Problem?
Replies
7
Views
2K
BJT transistor analysis: common emitter confusion
Replies
5
Views
3K
What is the solution to this rotational motion problem?
Replies
5
Views
1K
What is the solution to this Rotational Motion problem?
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top