What Are the Steps to Solve These Physics Problems on Motion and Forces?

AI Thread Summary
To solve the physics problems on motion and forces, start by analyzing Problem 1 by drawing a force diagram for the refrigerator on the ramp. Resolve the forces acting on the refrigerator into components that are perpendicular and parallel to the ramp's surface. Use the equation f=ma to establish a relationship between the forces and the mass of the refrigerator to find the coefficient of static friction. For Problem 2, similarly draw a force diagram for the box and resolve the forces, taking into account the pulling force at an angle and the coefficient of friction. Following these steps will help in calculating the required values for both problems effectively.
luvzdaladeez
Messages
3
Reaction score
0

PROBLEM 1

A 91 kg refrigerator is placed on a ramp. The refrigerator begins to slide when the ramp is raised to an angle of 34 degrees. What is the coefficient of static friction?


PROBLEM 2
A student moves a box of books down the hall by pulling on a rope attached to the box. The student pulls with a force of 185N at an angle of 25 degrees above the horizontal. The box has a mass of 35.0 kg, and coefficient between the box and the floor is 0.27. Find the acceleration of the box.

I NEED GUIDANCE ON HOW TO SOLVE THESE PROBLEMS
PLEASE INCLUDES STEPS SO THAT I CAN SEE EXACTLY HOW THE ANSWER WAS FOUND.

THANX
 
Physics news on Phys.org
Well if we concentrate on problem 1:

First of all draw a force diagram acting on the fridge.
resolve the forces perpendicular and parallel to the fridge's motion.
set up a force equation using f=ma.
 
I don't think this forum hands out answers.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top