What are the x- and y-components of the velocity vector?

AI Thread Summary
The discussion focuses on determining the x- and y-components of a velocity vector from a provided figure. The initial calculations for the components were incorrect due to the misuse of sine and cosine functions. The correct approach involves recognizing that the cosine function should be applied to the component along the negative y-axis, while the sine function applies to the x-axis. A user sought clarification on the angles formed with the axes after correcting their understanding. The conversation highlights the importance of accurately interpreting vector components in physics problems.
jamal.kun
Messages
3
Reaction score
1

Homework Statement


Question is: What are the x- and y-components of the velocity vector shown in the figure?
knight_Figure_03_22.jpg


https://session.masteringphysics.com/problemAsset/1384003/6/knight_Figure_03_22.jpg

The Attempt at a Solution


I tried -100 m/s*cos(30 degrees)=-86.6m/s for the x component and -100m/s*sin(30 degrees)=-50m/s for the y component, but was incorrect for both. What am I missing?
 
Physics news on Phys.org
jamal.kun said:

Homework Statement


Question is: What are the x- and y-components of the velocity vector shown in the figure?
knight_Figure_03_22.jpg


https://session.masteringphysics.com/problemAsset/1384003/6/knight_Figure_03_22.jpg

The Attempt at a Solution


I tried -100 m/s*cos(30 degrees)=-86.6m/s for the x component and -100m/s*sin(30 degrees)=-50m/s for the y component, but was incorrect for both. What am I missing?

Welcome to the PF.

You got the sin & cos backwards. Try drawing the line from the tip of the vector to the negative y axis. See how the component of the vector on the negative y-axis involves the cos(30 degrees)?
 
Thanks berkeman, I see what you mean now. I didn't expect something like that. Thank you for the incredibly quick reply.
 
If we drawing the line from the tip of the vertor to the negative y-axis then What will be its angle with x axis and negative y-axis?
 
Abdullah Wali said:
If we drawing the line from the tip of the vertor to the negative y-axis then What will be its angle with x axis and negative y-axis?
If you are asking jamal.kun, the thread is seven years old and jamal is no longer a forum member.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top