What Causes the Doppler Shift John Experiences?

  • Thread starter Thread starter asl3589
  • Start date Start date
  • Tags Tags
    Doppler
AI Thread Summary
The discussion revolves around the Doppler shift experienced by John while listening to a horn with a frequency of 300 Hz. John perceives a frequency of 270 Hz, leading to various interpretations of their relative motion. Key points include that both John and the horn can be moving at different speeds or in opposite directions, but if they are moving in the same direction at the same speed, there would be no Doppler shift. Additionally, John must be moving away from the horn for the frequency to decrease, and the statement about the distance decreasing is incorrect. The conversation clarifies the conditions under which the Doppler effect occurs.
asl3589
Messages
5
Reaction score
0

Homework Statement



John is listening to a horn. He knows the frequency of the horn is 300 Hz when both he and the horn are at rest. If he hears a pitch of 270 Hz, there are clearly several possibilities. For each of the following statements, indicate whether it is correct or incorrect.

Correct Incorrect Both can be moving and have different speeds.
Correct Both can be moving, in opposite directions.
Correct Incorrect John is moving away from the horn at rest.
Correct Incorrect Both can be moving in the same direction at the same speed.
Incorrect The distance between John and the horn is decreasing with time.
Correct Both can be moving and have the same speed.

These are the answers i put, could anyone help me as where I am going wrong
 
Physics news on Phys.org
asl3589 said:
Correct Incorrect Both can be moving and have different speeds.
Correct Both can be moving, in opposite directions.
Correct Incorrect John is moving away from the horn at rest.
Correct Incorrect Both can be moving in the same direction at the same speed.
Incorrect The distance between John and the horn is decreasing with time.
Correct Both can be moving and have the same speed.

Why did you put both correct and incorrect for some of them?
 
sorry its supposed to be

Correct Both can be moving and have different speeds.
Correct Both can be moving, in opposite directions.
Correct John is moving away from the horn at rest.
Correct Both can be moving in the same direction at the same speed.
Incorrect The distance between John and the horn is decreasing with time.
Correct Both can be moving and have the same speed.
 
asl3589 said:
Correct Both can be moving and have different speeds.
Correct Both can be moving, in opposite directions.

Right.

Correct John is moving away from the horn at rest.

I'm confused by the wording. The horn certainly doesn't have to be at rest, but John does have to be moving away from the horn.

Correct Both can be moving in the same direction at the same speed.

If they're both moving in the same direction at the same speed, there would be no Doppler shift. (Do you understand why?)


Incorrect The distance between John and the horn is decreasing with time.
Correct Both can be moving and have the same speed.

Right.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top