What Do Constant Torque and Constant HP Mean on an Electrical Motor Nameplate?

  • Thread starter Thread starter Eng_Luqman
  • Start date Start date
AI Thread Summary
Constant torque refers to the motor's ability to maintain a consistent torque output across a specified RPM range, which is crucial for applications requiring steady force, such as slitting steel sheets. In contrast, constant horsepower indicates that the motor can deliver a constant power output at higher RPMs, typically beyond the constant torque range, allowing for efficient operation at varying speeds. The specifications provided indicate that the motor operates at 110 kW and 150 HP, with constant torque from 60 to 600 RPM and constant HP from 550 to 1800 RPM. Understanding these terms is essential for selecting the right motor for specific applications and ensuring optimal performance. Proper interpretation of the motor nameplate data is vital for effective machinery operation and maintenance.
Eng_Luqman
Messages
19
Reaction score
0
I have This Electrical Motor Used For Slitting Machine Recoiler For Slitting up to 2.5 mm Steel Sheets Coil :

Specifications
Electrical Motor :

OutPut 110 Kw 150 HP 600 RPM

80 VOLTS 213 Amper

Constant Torque : 60 600 RPM
Constant HP : 550 1800 RPM

I want to know what are those meaning ... those datas I found it on the name plate of the electrical motor .

Specially The Both Of (( Constant Torque )) And (( Constant HP ))

The first time I observe this kind of specifications on a motor name plate

Please send me your help as you can

Regards
 
Engineering news on Phys.org
http://www.usfirst.org/robotics/2002/Workshops/Pulleys_Belts_Savoie.ppt
 
Last edited by a moderator:

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

Electrical Motor Specs for Slitting Machine Recoiler - 2.5mm Steel Sheets Coil
Replies
1
Views
4K
What Could Be Causing My 3 Phase Motor to Lack Power and Torque?
Replies
23
Views
6K
What type of motor would have the highest Stalled Torque?
Replies
8
Views
2K
What HP/torque Electric Motor to lift 1K lbs w/ sprokets
Replies
7
Views
4K
How to calculate how much energy a pneumatic system would need?
Replies
23
Views
2K
Water Pump System: Choosing the Right Electrical Motor
Replies
1
Views
13K
Where Can I Find an Electric Motor with These Specific Requirements?
Replies
1
Views
13K
Effect of Load Torque on Belt Tension and Power Transmission
Replies
12
Views
6K
Help for Mechanical Engineering Project w/Electric Motor
Replies
18
Views
4K

Hot Threads

Recent Insights

Back
Top