What fraction of the distance do the block move?

  • Thread starter Thread starter JD<3
  • Start date Start date
  • Tags Tags
    Block Fraction
AI Thread Summary
The discussion focuses on determining the fraction of distance s that a block slides after reaching the bottom of a frictionless ramp and transitioning to a rough horizontal plane. The key question is how far the block travels before its speed decreases to one-third of its maximum speed. Participants express confusion over the relationship between speed reduction and distance, with one suggesting that the answer might be s/3. However, others note the lack of critical information, such as the angle of the surfaces and the friction coefficient, which are necessary for solving the problem accurately. The conversation highlights the importance of understanding the physics involved in motion and friction.
JD<3
Messages
2
Reaction score
0
A block slides a distance d down a frictionless plane and then comes to a stop after sliding a distance s across a rough horizontal plane, as shown in the accompanying figure.

What fraction of the distance s does the block slide before its speed is reduced to one-third of the maximum speed it had at the bottom of the ramp?

a) s/3
b) 2s/3
c) s/9
d) 8s/9

Thanks for the help! :)
 

Attachments

  • Screen shot 2012-02-29 at 9.30.16 PM.png
    Screen shot 2012-02-29 at 9.30.16 PM.png
    4 KB · Views: 660
Physics news on Phys.org
could you show what attempts you have made at solving the problem?
 
I thought that since it is reduced by 1/3 then it would be s/3. But I'm so confused because I know when something is reduced then you multiply to find the number.
 
Is that all of the information that they gave you? It seems like they would have given you some other information, such as the angle between the smooth and rough surface, and especially the friction coefficient for the rough surface (usually denoted by the symbol μ).
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top