What is Chelsea's kinetic energy at t=2.50s?

AI Thread Summary
Chelsea, a calico cat, weighs 36.5 N and her position is described by a specific function of time. To find her kinetic energy at t=2.50s, the first derivative of the position function must be calculated to determine her velocity. The correct formula for kinetic energy is 0.5 times mass times the square of velocity. The discussion highlights confusion around differentiation methods, particularly regarding the use of the quotient rule versus the chain rule. Ultimately, the correct kinetic energy at t=2.50s is determined to be 57.1 joules.
positive infinity
Messages
9
Reaction score
0
Hello again and here is another problem I can't seem to figure out.

Chelsea, a calico cat, runs in a straight line chasing a car down the street. Chelsea weighs 36.5 N. and her position along the road is given by
x(t)=(3.50m/s)t+(0.425m/s^2)t^2+1.00ms/(t+1.00s)
Calculate Chelsea's kinitec energy at t=2.50s

The answe is 57.1 joules

Okay not I am not to sure if I'm supposed to find the first or the second derivative. well I compiled it like so
x(t)=at+bt^2+c/(t+d)
x'(t)=a+2bt+(t+d)*F((x)c)-c*F((x)t+d)/(t+d)^2 which comes out to
x'(t)=3.50m/s+2(0.425m/s^2)(2.50s)+(2.5m/s^2)/(2.5m/s+1.00s)^2 = 5.83m
(m*N)=Joules, 5.83m*36.5 N = 212.8 J <--way off so i tried for a second deriv.
x''(t)=2(0.425m/s^2+6.25m/s^2/(2.5s*1.00s)^3= 0.996m 0.996m*36.5N=36.3 J <-- still wrong , Where am I messing up can anyone please help me??!
 
Physics news on Phys.org
What is the formula for kinetic energy in terms of mass and velocity ?

Is velocity the first differential or second differential of the position wrt time ?

The differentiation is wrong. What is \frac{d}{dx}(\frac{1}{x + c}) ?
 
well I used the quotient rule, at the end because it seemed most logical. all we have to do is calculate the amount of joules whic m*N= J and we find the deriv. of the position time function given But, I'm not so sure.
 
positive infinity said:
well I used the quotient rule, at the end because it seemed most logical. all we have to do is calculate the amount of joules whic m*N= J and we find the deriv. of the position time function given But, I'm not so sure.

From the way you wrote the expression out, isn't it of the form :

3.5t + 0.425t^2 + \frac{1}{t + 1}

rather than

\frac{3.5t + 0.425t^2 +1}{t + 1} ?

The former expression does not need quotient rule to differentiate it. Well you can, but there's a much easier way to do it. But first clarify the question. Besides where do all the F(x) etc come from ?
 
Curious3141 said:
The former expression does not need quotient rule to differentiate it. Well you can, but there's a much easier way to do it. But first clarify the question. Besides where do all the F(x) etc come from ?

3.5t + 0.425t^2 + \frac{1}{t + 1} That is the correct equation.

Im in the same class, by the F(x)'s that's the position time function we are givin. Now I am confused on how to find Kinetic energy. Do I just determine the first derivative? Will that give me K.E(t)?

Thanks,
Andy
 
tanky322 said:
3.5t + 0.425t^2 + \frac{1}{t + 1} That is the correct equation.

Im in the same class, by the F(x)'s that's the position time function we are givin. Now I am confused on how to find Kinetic energy. Do I just determine the first derivative? Will that give me K.E(t)?

Thanks,
Andy

The first derivative of the displacement will give the velocity.

The kinetic energy is given by 0.5*mass*(velocity)^2

The mass can be found from the weight of the cat (given).

Can you differentiate \frac{1}{t + 1} wrt t

by chain rule ? Or you can use quotient rule, but chain rule is easier here.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top