What is the force needed to stretch a horizontal spring by 7.15 cm?

AI Thread Summary
To calculate the force needed to stretch a spring by 7.15 cm, Hooke's Law (F = kx) is applied, where k is the spring constant (333 N/m) and x is the displacement (0.0715 m). The resulting force can be calculated as F = 333 N/m * 0.0715 m, leading to the required force. For the second part, when the spring is stretched to 2.88 cm, the acceleration of the mass can be determined using energy principles, considering both potential and kinetic energy. The potential energy of the spring at different displacements and the relationship between force, mass, and acceleration (F = ma) are crucial for solving the problem. Understanding these concepts will help in accurately addressing the homework assignment.
destro47
Messages
16
Reaction score
0
One end of a horizontal spring (k = 333 N/m) is attached to a 3.12 kg box, and the other end to a fixed, vertical wall. (A picture of this situation can be found in Fig 4-10 on page 102 of your textbook.)

a) Find the magnitude of the force needed to move the mass so the spring is stretched by 7.15 cm.

b) Suppose the spring is stretched 7.15 cm and released. When the spring is stretched by only 2.88 cm, what is the acceleration of the mass?

Tried it plugging in the given quantities into hookes equation, doesn't work out that way. How do I approach this one? Here is what I'm thinking so far:

F=ma
where F in this case is the same F in hookes equation, thus:

-kx= ma


Am I on the right track here?
 
Physics news on Phys.org
You should be thinking in terms of energy, remember the potential energy of a spring displaced from equilibrium by a distance of x is 1/2*k*x^2

Also knowing that W=F*d, you can solve a)

Similarly for b) you start with all potential energy and at x=2.88 you have part potential and part kinetic, kinetic of course involves the speed, which you can solve for

EDIT: For a) I think I just solved for the force required to stretch the spring and you'd also have to add to that expression for w, so W=Wspring+Wmass, so the work done just displacing the spring + the work done just displacing the mass. I think
 
Last edited:
Sorry but my class has not covered W yet. I believe its W=fd, right? My professor is a real ball buster who genuinely enjoys making his students squirm over the homework assignments. Any other suggestions?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top