What Is the Height of the Tower?

AI Thread Summary
The problem involves a rock thrown vertically upward, passing the top of a tower at 1.6 seconds and reaching maximum height 2 seconds later. The initial velocity was calculated as 19.6 m/s, but the timing for reaching maximum height was incorrectly assumed to be 2 seconds after passing the tower. The correct total time to maximum height is 3.6 seconds, which changes the calculations for the tower's height. Adjusting the timing leads to a reevaluation of the height calculation, indicating a misunderstanding in the initial approach.
phyphyphy
Messages
3
Reaction score
0
A rock is thrown vertically upward from ground level at time t = 0. At t = 1.6 s it passes the top of a tall tower, and 2.0 s later it reaches its maximum height. What is the height of the tower?

My thought process:

First find initial velocity:

v=vo+at
0=vo+(-9.8)(2)
vo=19.6 m/s

Then you can find the height of the tower, where x-xo is the displacement/height of the tower:
x-xo=vo*t+.5*a*t^2
x-xo=19.6*1.6+.5*-9.8*1.6^2
x-xo=18.816 m

However, WileyPlus says that I am wrong. What am I doing wrong?
 
Physics news on Phys.org
phyphyphy said:
0=vo+(-9.8)(2)
vo=19.6 m/s

You did almost everything correctly. But is it true that it's maximum height is reached after 2 seconds?
(That's what your math says.)
 
OH, so I should have the maximum height as 3.6 seconds, correct?
 
phyphyphy said:
OH, so I should have the maximum height as 3.6 seconds, correct?

Correct.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top