What is the length of the rotating string on a string trimmer?

  • Thread starter Thread starter tbontom
  • Start date Start date
AI Thread Summary
The discussion focuses on calculating the length of the rotating string on a string trimmer, which operates at an angular speed of 42 revolutions per second and a tangential speed of 46 m/s. A relationship between angular speed and tangential speed is highlighted, indicating that understanding angular kinematics is essential for solving the problem. A participant shares their struggle with the calculations but ultimately figures out the solution using the formulas for angular velocity and radius. The conversation emphasizes the importance of grasping these concepts to avoid confusion. The thread concludes with a sense of relief after reaching the correct answer.
tbontom
Messages
6
Reaction score
0
A string trimmer is a tool for cutting grass and weeds; it utilizes a length of nylon "string" that rotates about an axis perpendicular to one end of the string. The string rotates at an angular speed of 42 rev/s, and its tip has a tangential speed of 46 m/s. What is the length of the rotating string?
 
Physics news on Phys.org
there is a specific relationship between angular speed and tangential speed. Find the section in your textbook that deals with angular kinematics. Once you find it you will want to hit yourself.

If it helps, imagine a particle moving in a circle of radius 5 meters, with a tangential speed of 1 m/s. How many revolutions would this particle make in one second?
 
Its just not clicking, I tried this and it didn't work w = 2pi*42/60
r = 46/w
 
i got it and boy do i feel like an idiot, thank buddy
 
thanks**
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top