What Is the Maximum Speed to Stop Safely Within 40 Meters?

  • Thread starter Thread starter NMiller5a
  • Start date Start date
  • Tags Tags
    Maximum Speed
AI Thread Summary
The discussion centers on calculating the maximum speed a driver can safely stop within 40 meters, given a reaction time of 0.75 seconds and a deceleration of -10 m/s². The initial approach involved breaking the problem into two parts, but the equation formed was deemed incorrect. A suggestion was made to use the formula v² = u² + 2as instead of the initial method. After revising the equation, the correct maximum speed was determined to be approximately 21.76 m/s, or 78 km/h. This calculation emphasizes the importance of understanding kinematic equations for safe driving practices.
NMiller5a
Messages
2
Reaction score
0
I've been trying for about an hour to figure this one out and decided that I should probably ask some people who know what their doing for some input.

"A driver of a car suddenly sees the lights of a barrier 40 m ahead; it takes the drive 0.75 s to apply the brakes; the car accelerates at a speed of -10 m/s^2. What is the maximum speed possible?"

I decided to break the problems into two parts; first, the total distance covered during the time prior to initiating of braking and the time after. For the former part I was left with (Vo)(0.75). The latter part I ended with Vo(Vo/10)+0.5(-10)(Vo)^2. I put those together and 40=(Vo)(0.75)+Vo(Vo/10)+0.5(-10)(Vo)^2. Did I create an incorrect equation?
 
Physics news on Phys.org
Welcome to PF!

I think the second part of the equation is incorrect.

You are trying to use s = ut + 0.5 a t^2, right?

You shouldn't as that is 1 equation with two unknowns - you don't know what s is, and you don't know what t is.

Instead, use v^2 = u^2 + 2*a*s, and seen where you get from there.

PS: You know SUVAT terminology, right?
s = displacement
u = initial velocity
v = final velocity
a = acceleration
t = time
 
Thank you for your prompt reply and assistance!

I changed my equation into v=u^2+2(a)(s) and it worked very well. 0=u^2+2(-10)(40-0.75u)] worked perfectly and I got an answer of 21.76 m/s, or about 78 km/h.

When the time comes that I'm only 40 meters away from an inescapable barrier I'll know if I'm doomed or not...
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top