What is the minium force required to pull block C out from under block B?

AI Thread Summary
To determine the minimum force required to pull block C out from under block B, one must consider the static friction between the blocks and the ground. The normal force on mass C is calculated as 9 kg multiplied by 9.8 N, resulting in 88.2 N. The static friction force between C and the ground, using a coefficient of 0.8, is 0.8 times the normal force, equating to 70.56 N. Additionally, the friction between B and C, with a coefficient of 0.5, must also be accounted for, which involves the weight of blocks A and B. Understanding the problem's components and breaking it down into manageable parts is crucial for finding the correct solution.
tucky
Messages
30
Reaction score
0
Q: There is a mass of a mass A (2kg ) sitting on top of a mass of B ( 4kg), which is sitting on top of a mass of C(3 kg). The static friction between A and B is .5; and between B and C is .5 and between C and the ground is .8. Mass B is tied to the wall. What is the minium force required to pull block C out from under block B?

A: Well I am really confused about static friction, the Normal force acting on Mass C is 9kg*9.8N=88.2 N, and is u static is .8+.3=.13, so therefore the static force is
us.* Normal force = Static force =13*88.2 = 88.2N (is that force it would take to move Mass C?)
 
Physics news on Phys.org
sorry I meant that it was .13*88.2N = 11.46N of force, that does not seem right. When you figure the static force, is that the force that it takes to move the object?
 
please read what i had to say in another thread: https://www.physicsforums.com/showthread.php?s=&threadid=6603

Especially the part about drawing a picture.

Physics is not about plugging in values into formulas and hoping the get the right answer. You must first understand what the problem entails and attack it in an ordially fashion.

Make the problem simple and break is into two parts - the friction on the bottom of C and the friction on top of C.

For the bottom of C you have the weight of the whole system times the coefficient of static friction between C and the floor. On the top of C you have the weight of A and B. times the coefficient of static friction between B and C

Now its just a matter of sum of forces in the x direction.
 
thank you so much, I was lost. You are right about drawing the pictures, it is just hard to do that on the computer.

tucky
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top