What is the Optimal Angle for Pulling a Sled to Minimize Force?

  • Thread starter Thread starter slugglee
  • Start date Start date
  • Tags Tags
    Force Minimum
AI Thread Summary
To minimize the force exerted while pulling a sled up a slope, the optimal angle for the boy should be determined using calculus. The current angle of 30 degrees is not ideal, and a mathematical approach is necessary to find the minimum force angle, which may be closer to 0 degrees. By analyzing the forces involved, including the normal force and gravitational pull, one can derive an equation that accounts for the work done against friction and the boy's weight. A diagram of the sled, boy, and slope will aid in visualizing the forces at play. Ultimately, the goal is to find the angle that minimizes the work required to pull the sled uphill.
slugglee
Messages
1
Reaction score
0

Homework Statement



A Small boy is sledding on a snowy slope and looks very weary as he drags his sled up again after each run. Each time he pulls the sled up he makes an angle of 30 degrees with respect to the ground. The mu of kinetic friction is 0.10. At what angle should the boy be pulling to exert minimum force?


Homework Equations





The Attempt at a Solution



By way of plugging and chugging various numbers, I believe that the angle should be 0. But to get a difinitive answer,our teacher hinted that I would need to use calculus, but I'm not readily famailar with exactly how to apply a sum of all forces equation in that manner.
 
Physics news on Phys.org
Welcome to PF.

I would suggest that you first draw a diagram of the sled/boy/slope.

Consider that the slope is at angle φ and let the boy be pulling (relative to the slope) at angle θ, such that the normal force on the sled would be given by m*g*cosφ (less the θ component of lift from the boy) and the downward force of gravity would be given by m*g*sinφ less the cosine force of the pull from the boy. .

From that you should be able to create an equation that identifies the Work done to carry himself up the hill, and the work needed to pull the sled up the hill against friction. (Don't forget he is adding to his weight and hence his work in getting up the hill as he pulls at angle θ.)

Ultimately you will want to identify, for any particular φ the minimum of the function of θ in the expression of work.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top