What is the Value of the Second Capacitor in a Charge Conservation Problem?

  • Thread starter Thread starter leolaw
  • Start date Start date
  • Tags Tags
    Capacitor
AI Thread Summary
In the discussion about the second capacitor's value in a charge conservation problem, the initial charge on the first capacitor (C_1) is calculated as 9.625 * 10^-4 C after being charged by a 125-V battery. When connected to an uncharged second capacitor (C_2), the final voltage across both capacitors is 15V each, leading to the equation 9.625 * 10^-4 = (C_1 + C_2)(30). Solving this, C_2 is found to be 2.4 * 10^-5 F. Additionally, a similar problem involving a 2.7 uF capacitor charged by a 12V battery is discussed, focusing on energy calculations before and after connecting to a 4 uF capacitor. The total energy change is determined by the difference in energy before and after the connection.
leolaw
Messages
85
Reaction score
1
A 7.7 uF capacitor is charged by a 125-V battery and then is disconnected from the battery. When this Capacitor C_1 is then connected to a second (initially uncharged) capacitor, C_2, is the final voltage on each capacitor is 15V. What is the value of C_2
(The hint from the book is that, charge is conserved.)

Here is how I have approached the problem:
Q= CV, so the charge on C_1 is 7.7 * 10^-6 * 125 = 9.625 * 10^-4
And this is also the total charge before removing the battery. After inserting C_2, the total voltage is 30V, so we have:
9.625*10^{-4} = (C_1 + C_2)(30)
and solve for C_2, which is 2.4 * 10^-5

Am i right?
 
Physics news on Phys.org
The total Voltage after the charging is done is 30V however the voltage is then split into 15V for both

C_{1} (15) + C_{2} (15) = C_{1} (125)

because the charge is conserved the sum of charges on both the capacitors is the charge on the capacitor 1 on how it started. Also Read teh question ti says the FINAL VOLTAGE ON EACH CAPACITOR is 15V.
 
Thx, I similar problem like the previous one:

A 2.7 uF capacitor is charged by a 12V battery. It is disconnected from the battery and then connected to an uncharged 4 uF capacitor. Determine the total stored energy (a) before the two capacitors are connected, and (b) after they are connected. (c) what is the change in energy?

(a) it is just \frac{1}{2}\frac{Q^2}{C}, so it is 1.944* 10^-4J
(b) The total capacitance in the circut is 6.7uF, so we can find the total voltage by using Q= CV where Q is the total charge from C_2 or 2.7*10-6 * 12 = 3.24 * 10 ^-5, so the total voltage is 3.24 * 10^{-5} / 6.7 * 10^-6 = 4.8358 V
Then we setup the equation :
(2.7{\mu}F)(V_1)+(4{\mu}F)(V_2) = 3.24*10^-5 and V_1+V_2 = 4.8358,
then we calculate the electric energy on each capacitance individually by using \frac{1}{2}CV^2, and add them together

(c) it is just the difference of (a)-(b)

I am not quite sure if i am right on part (b)
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top