What knowledge is needed for Electromagnet design?

Thread starter Bowen88
Start date Jul 24, 2012
Tags

Design Electromagnet Electromagnet design Knowledge

AI Thread Summary

To design an electromagnet, a solid understanding of electromagnetism principles, including Ampere's Law and magnetic fields, is essential. Knowledge of materials, such as ferromagnetic cores and wire types, is crucial for optimizing performance. Familiarity with electrical engineering concepts, including current, voltage, and resistance, will aid in effective design. Resources like textbooks on electromagnetism and online courses can provide foundational knowledge. Practical experimentation and simulation tools are also recommended for hands-on learning and design validation.

Jul 24, 2012

Bowen88

guys,
I want to design a electromagnet. but i do not know how to start.
so could you please tell me what knowledge is needed for electromagnet design?
Or you can recommed some data that i can find and buy myself.
thanks in advance!

Engineering news on Phys.org

Jul 24, 2012

huntoon

http://hilaroad.com/camp/projects/magnet.html

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...

View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...

View full post »