What was the x component of the initial velocity of the ball?

AI Thread Summary
The discussion focuses on calculating the components of the initial velocity of a ball thrown into the air. The x component of the initial velocity is determined to be 13.5 m/s, calculated by dividing the horizontal distance traveled (27 m) by the time (2 s). For the y component, confusion arises regarding the calculation, as it cannot simply be derived from the height (10 m) divided by time. The initial speed of the throw can be found using the Pythagorean theorem, combining both velocity components, while the initial angle of the throw is calculated using the arctangent of the height over the horizontal distance. The height at the top of the ball's path requires applying kinematic equations, considering the constant acceleration due to gravity.
wolves5
Messages
52
Reaction score
0
A ball is thrown into the air from ground level. After a time t = 2 s, the ball has traveled to a position x1 = 27 m to the right of and y1 = 10 m up from where it was thrown (at this time, the x and y components of the ball's velocity are still positive). The axes show the x and y directions to be considered positive.

a) What was the x component of the initial velocity of the ball?
I got 13.5 m/s. I did (27m / 2 seconds)

b) What was the y component of the initial velocity of the ball?
Why is this not (10 m/ 2 seconds)?

c) What was the initial speed of the throw?
I don't know which equation to use. Or would you just do the square root of part a + part b?

d) What was the initial angle of the throw relative to the horizontal? Please enter your answer in degrees.
Is this tan-1 (10/27)?

e) What is the height of the ball at the top of its path?

I don't know what to do for this one.
 
Physics news on Phys.org


The x comp of the velocity is correct since the velocity in the x direction is constant. In the y direction, the velocity is not constant since the ball is constantly decelertaing on its way up, so you must use one of the other kinematic equations for constant acceleration. What is the acceleration in the y direction?
 


-9.8m/s2. Which equation is it?
 


You are given t =2 s and you know g = 9.8 m/s^2, and you are given the height y is 10 m after 2 seconds. You want to solve for the initial velocity in the y direction. Which equation would you choose?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top