Where Are Electron-Hole Pairs Created in Solar Cells?

AI Thread Summary
In solar cells, electron-hole pairs are generated throughout the semiconductor but primarily contribute to power generation when formed in the depleted region of the pn-junction. These pairs quickly recombine unless they are separated by the built-in electric field, which directs electrons to the n-type side and holes to the p-type side. This separation creates excess charge carriers, leading to a flow of current when the terminals are connected. The role of the electric field is crucial for efficient energy conversion in solar cells. Understanding this mechanism is essential for optimizing solar cell performance.
properphysicist
Messages
10
Reaction score
0
When power is generated in a solar cell, it is because of irradiance of radiation on a pn-junction. But in which part of the junction are the electron-hole pairs created? Is it just the depleted region or are they also created in the n- and p-type semiconductors?

An engineer's response would be for me to consider a current source in parallel with a diode but I need a physicists response. What the heck is going on in a solar cell?

I'd be grateful for any help, thanks.
 
Physics news on Phys.org
properphysicist said:
When power is generated in a solar cell, it is because of irradiance of radiation on a pn-junction. But in which part of the junction are the electron-hole pairs created? Is it just the depleted region or are they also created in the n- and p-type semiconductors?


I'd be grateful for any help, thanks.

The electron-hole pairs can be generated anywhere in a semiconductor, but they would recombine at once and nothing would happen unless they were formed in the depleted region and sucked away at opposite directions by the "built-in" electric field there. You know that positive charges are accumulated at the n type side near the junction and negative charges at the p type side. So the electron-hole pair will be separated, the electron moving into the n side and the hole moving into the p side. This results excess charge on both sides, and connecting the terminals you get current.


ehild
 
Thank-you echild. That answer is quite helpful.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top