Which Diode is Best for Charging and Maintaining Capacitor Charge?

  • Thread starter Thread starter pumas
  • Start date Start date
  • Tags Tags
    Capacitor Diode
AI Thread Summary
The discussion focuses on selecting the best diode for charging and maintaining a capacitor's charge. The diode with the smallest reverse leakage current is identified as the most suitable option, as it allows the capacitor to discharge more slowly. While this diode may take longer to charge, the leakage current does not affect the charging time since the diode operates in the forward bias region during charging. Schottky diodes, known for higher leakage currents but lower forward voltage drops, can charge capacitors to higher voltages, impacting discharge time. Ultimately, the diode with the smallest leakage current is recommended for optimal performance.
pumas
Messages
15
Reaction score
0
Hello,

In lab the reverse leakage current of 4 different diodes was measured. Then ranked from smallest to biggest. Then we are asked to decide which diode would be most suitable for charging up a capacitor and allowing the capacitor to keep its charge for the longest period of time?

I think it would be the one with the smallest current because it would allow the capacitor to discharge slower. However, it would take longer to charge. Am I right?:confused:
 
Physics news on Phys.org
pumas said:
I think it would be the one with the smallest current because it would allow the capacitor to discharge slower. However, it would take longer to charge. Am I right?:confused:

Yes, the one with the smallest leakage current will discharge the capacitor the slowest. As for the charging time, it has nothing to do with the leakage current, because when you charge the capacitor, the diode operates in the forward bias region.

Now it's true that the diode with the biggest leakage current might happen to be a Schottky diode (because they have bigger leakage current than pN junction diodes), and the Schottky diode has a lower forward voltage drop at same forward currents: ~0.2V compared to ~0.7V for a pN junction diode, which means that the capacitor will be charged to a higher voltage and thus take a longer time to discharge.

But given that you only know the leakage currents, you assume the diodes to be of the same type and the correct answer is the diode with the smallest leakage current.
 
Thanks for your help :smile:
 
Back
Top