Why doesn't capacitance decrease with increase in temperature?

AI Thread Summary
Capacitance does not decrease with an increase in temperature due to the fundamental role of the dielectric material in capacitors. While conductivity typically increases with temperature, leading to more electron movement, this does not directly correlate to a decrease in capacitance. The energy in a capacitor is stored in the electric field between its plates, and changing temperature does not affect this capacity. Instead, the permittivity of the dielectric material plays a crucial role, and higher temperatures can lead to increased molecular motion that may affect polarization but does not necessarily reduce capacitance. Understanding these principles clarifies why capacitance remains relatively stable despite temperature fluctuations.
ARAVIND113122
Messages
54
Reaction score
0
why doesn't capacitance decrease with increase in temperature??

It is known that conductivity increases with temperature.This is because heat provides kinetic energy to the electrons in a substance,thus increasing the rate of "flow" of electrons.Considering this,the electrons in a dielectric in a capacitor should also get excited on heating.This means the electrons are more likely to break away from one end and would travel to the other end.This means that the CAPACITY OF THE DIELECTRIC TO RESIST THE FLOW OF CHARGES[which in fact the capacitance of dielectric in the given set up] MUST DECREASE,WITH INCREASE IN TEMPERATURE.
am i right or is there something more to it??
please help me.
 
Physics news on Phys.org


Energy in capacitor in stored in electric field between the plates of capacitor.By changing T you are not influencing C.Remember this
 


the question is-why? what is wrong in the explanation i have given?
Wouldn't increasing temperature excite the electrons and thus,reduce the ability of the dielectric to prevent the charges from flowing?
if you look at what a capacitor really is-it is a device that helps in maintaining a potential difference without allowing the charges to flow.It is this ability that is called capacitance.A good capacitor can hold more more charges without breaking down.But if the charges are highly excited[i.e, the temperature is very high],then the capacitor cannot "hold" them.So,at different temperatures,the same set up will have different capacitance.Isn't it?
 


ARAVIND113122 said:
It is known that conductivity increases with temperature.This is because heat provides kinetic energy to the electrons in a substance,thus increasing the rate of "flow" of electrons.Considering this,the electrons in a dielectric in a capacitor should also get excited on heating.This means the electrons are more likely to break away from one end and would travel to the other end.This means that the CAPACITY OF THE DIELECTRIC TO RESIST THE FLOW OF CHARGES[which in fact the capacitance of dielectric in the given set up] MUST DECREASE,WITH INCREASE IN TEMPERATURE.
am i right or is there something more to it??
please help me.

you have a few bad assumptions in your reasoning. from wiki...

Temperature dependence
In general, electrical resistivity of metals increases with temperature, while the resistivity of intrinsic semiconductors decreases with increasing temperature. In both cases, electron–phonon interactions can play a key role. At high temperatures, the resistance of a metal increases linearly with temperature. As the temperature of a metal is reduced, the temperature dependence of resistivity follows a power law function of temperature.

and to add to your misunderstanding... think of superconductors research and use...

They are not hot are they ? rather they are supercooled

cheers
Dave
 
If the conductivity is higher you don't get a higher capacitance, you get more leakage.
What you want it the permittivity. I looked up a capacitor data sheet, and there seems to be a maximum usually.

http://www.niccomp.com/Products/TC_Ceramics.pdf"

I think capacitance goes down for higher temperatures, because the random movement of the molecules will undo the polarization.
 
Last edited by a moderator:
  • Like
Likes lightgrav
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top