Why is the equation for delta t in a Michelson interferometer 2(L/v - L/c)?

AI Thread Summary
The equation for delta t in a Michelson interferometer is derived from the difference in light travel time through air versus a vacuum. When air is present, light travels at speed v, taking time L/v, while in a vacuum, it travels at speed c, taking time L/c. The time difference is thus expressed as 2(L/v - L/c) because the light travels the distance twice in the interferometer setup. This simplification arises from focusing on the additional time needed for light in air compared to a vacuum, rather than calculating total travel time. Understanding this concept is crucial for solving related physics problems.
BareFootKing
Messages
30
Reaction score
0

Homework Statement



In one arm of a Michelson interferometer the light passes through a glass tube of length L which contains air. The air is pumped slowly out of the tube and during this process it is found that the intensity of light reaching the eye has increased and decreased n times. What is the velocity v of light in air? Express your answer in terms of ,L n, c, λ(the wavelength of light). You may assume (correctly) that the difference between v and c is small.

Homework Equations





The Attempt at a Solution


Here is the solution
[img=http://s24.postimg.org/4elfpk629/Untitled.jpg]


For the delta t, the decrease in time when the light Is pumped out, I am having trouble understanding why the equation Is 2(L/v – L/c). If we just looked at when the light traveled up there would be moments where the light would be traveling at a speed of c and other moment where the light would be traveling at a speed v. Wouldn’t the time difference be x¬1/v – x2/c where x1+ x2 = L and x1is the distance the light travels at a speed of v when the gas is still in the tube, and x2 the distance that the light travels going up the leg at a speed c when the gas is pumped out. Why is it not the time difference, and why is it so simplified. And the solution is correct because it is a solution to my physics problem set from 2 weeks ago, but the professor never explained it, and it is spring break now so I can’t ask him.
 
Physics news on Phys.org
You are not interested in the total time the light needs - you always have the other arm of the interferometer as reference. The relevant quantity is the additional time the light needs in air: It needs L/v if air is present, and L/c if there is no air. Therefore, the difference is L/v-L/c.
 
Thank you very much for your response.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top