Wind Turbine: Min. Wind Speed for 6MW Generator

Thread starter jacques dichi
Start date Mar 8, 2013
Tags

Generator Speed Turbine Wind Wind turbine

AI Thread Summary

The minimum wind speed required to activate a 6MW wind turbine generator largely depends on its design. A small wingspan of 5 meters suggests that the turbine may require higher wind speeds to generate significant power. Generally, achieving full power output from such a turbine would necessitate high wind speeds. Additional details about the turbine's specifications could provide more precise information. Understanding the design parameters is crucial for determining the operational efficiency of the generator.

Mar 8, 2013

jacques dichi

Suppose I've got a 6mw wind turbine with a very small wing span - 5 meters-,
what would the minimum wind speed needed to activate the generator ?

Engineering news on Phys.org

Mar 8, 2013

cjl

Science Advisor

That would entirely depend on the design of the generator. That having been said, the wind speed to obtain full power would be very high.

Mar 9, 2013

jacques dichi

cjl - hi
Thks for yr reply-I'll try to furnish some more information

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...

View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...

View full post »