Xenon oxide photochemical preparation?

  • Thread starter Thread starter JohnRC
  • Start date Start date
  • Tags Tags
    Preparation Xenon
AI Thread Summary
The discussion centers on a 1994 symposium presentation regarding the reaction of xenon and oxygen, where it was claimed that an equimolar mixture of these gases could produce explosive xenon oxides when irradiated. The original poster expresses uncertainty about the details and seeks references or similar experiments, noting that xenon typically does not react directly with oxygen. Instead, xenon oxides are usually formed through reactions involving xenon fluorides. A participant highlights the potential for high-pressure xenon lamps to explode, suggesting that microcracks in the quartz envelope could allow oxygen to interact with xenon, potentially forming ozone, a strong oxidizing agent. This could lead to the formation of unstable xenon oxides like XeO3 or XeO4, which are highly explosive, especially under the high temperatures present in these lamps. The conversation reflects a mix of curiosity about xenon chemistry and speculation on the mechanisms behind the explosive behavior of xenon lamps.
JohnRC
Messages
148
Reaction score
2
In 1994 I attended a symposium at University College London to celebrate the centenary of William Ramsay's discovery of argon. In a rather remarkable presentation there some slides were shown of some beautiful clear large crystals in a sealed quartz flask.

If my memory is not playing tricks on me, I think the lecturer said something even more surprising: that the crystals were the result of leaving an equimolar mixture of xenon and oxygen in the flask to be irradiated in strong sunlight in the middle of a sports field. After the photographs were taken the flask was destroyed by throwing stones at it, because the product, an oxide of xenon, was too unstable and explosive to be safely handled in the flask.

It is a long shot, but has anyone else a lead on this experiment? A publication? A similar lecture? Some detail that I might have got wrong? I have failed to find anything like it, but would rather like to have a reference.
 
Chemistry news on Phys.org
Apologies to all. I think I must have misremembered -- have discovered that xenon difluoride can be prepared in an exactly analogous way to what I have described with a mixture of xenon and fluorine gases.

Will leave this thread open just in case anyone does have information about a direct reaction between xenon and oxygen.
 
I had read that Xenon do not react directly with Oxygen. Instead, Oxides of Xenon are obtained by reacting fluorides of Xenon with Oxygen.
 
AGNuke said:
I had read that Xenon do not react directly with Oxygen. Instead, Oxides of Xenon are obtained by reacting fluorides of Xenon with Oxygen.

Yes AGNuke, that is certainly the received textbook wisdom.

I did have a purpose in asking specifically about the direct reaction. For many years I have wondered why high pressure xenon lamps occasionally explode with a violence that seems extreme, even allowing for a high working temperature and high internal pressure in the quartz envelope. These lamps are often used as continuous sources of intense UV radiation in photochemical studies.

Was wondering about the possibility of buildup of unstable explosive xenon oxides where the two gases could come into contact in microcracks in a quartz envelope.
 
Here's what I think of your assertion. According to another divine textbook wisdom, Xenon Short Arc Lamps has high spectral emission in Ultra-Violet region. And it doesn't require explanation what happens to O2 when it is exposed to UV.

Now, if the oxygen diffuses inside the quartz envelope due to some defects or something like that, Ozone will come in direct contact with the Xenon Gas. Correct me here, but I think that Ozone is one of the strongest oxidizing agents, just falling short of Fluorine, which can oxidize Xenon on its own, so why not Ozone?

Then what, for a moment, XeO3 or XeO4 can be formed, both of which are very explosive even at room temperature, let alone at the temperature attained in the Xenon Lamps. Then no need to tell what will happen.

This is the best reasoning I can come up with. I don't know anything about Xenon chemistry. In fact, I only learned 12th grade chemistry in my country, so I don't know whether my "hypothesis" stands or not.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...

Similar threads

Replies
11
Views
27K
Back
Top