What is the impact force when a 100-pound object is dropped from 6 feet?

AI Thread Summary
Dropping a 100-pound object from a height of 6 feet results in an impact force that varies based on the deformation of the surfaces involved. The object will hit the ground at approximately 20 ft/sec, and the impact force can reach several thousand pounds, depending on how quickly it comes to a stop. For instance, if the stop time is 0.01 seconds, the impact force could be around 6000 pounds. The actual force experienced will differ based on the hardness of the ground and the object's material properties. Thus, without specific data on deformation and stop time, a precise answer cannot be determined.
cow
Messages
1
Reaction score
0
Heya,

I need help answering a question:

If i drop an object that weighs 100 pounds from a height of 6 feet what will be the impact in pounds when the object hits the ground (assume that the ground is a hard surface)?

Thanks for any help that you guys can provide.

edit:

I just want to say that this is NOT a homework question. Just a question that my dad needs answered. We looked through an old college physics textbook I have but were not able to come up with an answer.
 
Last edited:
Physics news on Phys.org
There is no such thing as a perfectly rigid surface. All materials must deform at least a small amount when a force is applied. The amount of this deformation during impact determines the time and force of impact...the greater the deformation of the contacting surfaces, the less the impact force. So your question is not answerable in the absence of other data. The object, neglecting air resistance, will hit the ground at about 20 ft/sec, and come to a stop in a short time. The impact force will likely be several thousand pounds or more, depending on what that stop time (and deformation) is. For example, if it came to a stop in 0.01 seconds, then F=m(delta v)/t = approximately
(100/32)(20)/0.01 = 6000 pounds. If the ground/object were harder or softer, , that force could significantly increase or decrease since the contact time would be different.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top