Inelastic Collisions: Solving for Spring Displacement

AI Thread Summary
In an inelastic collision scenario, block 1 (2.0 kg) collides with block 2 (1.4 kg) at rest, causing them to stick together. The conservation of momentum equation m1v1 = m2v2 is used to find the velocity of the combined blocks after the collision. The spring constant of 170 N/m is relevant for calculating the energy stored in the spring when compressed. The kinetic energy of the combined blocks is equated to the potential energy of the spring using the formula W = 1/2 kx^2. The final displacement of the spring is determined to be 0.33 m.
patelkey
Messages
16
Reaction score
0

Homework Statement



In the figure below, block 2 (mass 1.4 kg) is at rest on a frictionless surface and touching the end of an unstretched spring of spring constant 170 N/m. The other end of the spring is fixed to a wall. Block 1 (mass 2.0 kg), traveling at speed v1 = 4.0 m/s, collides with block 2, and the two blocks stick together. When the blocks momentarily stop, by what distance is the spring

Homework Equations



m1v1=m2v2

The Attempt at a Solution


I attempted the solution but I am confused about the 170N/m
How would I use that information and relate it to the equations of inelastic collision?
 
Physics news on Phys.org
Find the velocity of the combined blocks after collision. Then find the KE of the the combined blocks.
What is the expression for the energy stored in a compressed spring?
 
ohhh okk i got it
I had to use W=1/2kx^2
they gave k and i figured out W through the KE equation.
it was 0.33 m if you were curious.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

Elastic collision of block on block
Replies
4
Views
2K
Why is this inelastic collision problem solvable?
Replies
9
Views
4K
Dropping a Block on a Spring with Completely Inelastic Collision
Replies
11
Views
3K
Completely inelastic collision with object attached to spring
Replies
1
Views
2K
How do I solve for an elastic collision going up a ramp?
Replies
10
Views
3K
Question about momentum and kinetic energy.
Replies
5
Views
2K
Elastic collision and inelastic collision
Replies
5
Views
6K
Potential Energy - 2D inelastic collision - ballistic pendulum
Replies
10
Views
2K
Sequental elastic and inelastic collisions
Replies
4
Views
2K
How Far Will the Spring Compress in a Frictionless Collision?
Replies
3
Views
1K

Hot Threads

Recent Insights

Back
Top