Heat Transfer Through a Plane Wall

bob1182006
Messages
491
Reaction score
1

Homework Statement


Consider a large plane wall of thickness L = 0.4m, thermal conductivity k = 1.8W/(m*K), and surface area A = 30m2. The left side of the wall is maintained at a constant temperature of T1 = 90 C while the right side looses heat by convection to the surrounding air at Ts = 25 C with a heat transfer coefficient of h = 24 W(m2*K). Assuming constant thermal conductivity and no heat generation in the wall evaluate the rate of heat transfer through the wall.
Answer: 7079 W

My answer doesn't match the book's answer.

Homework Equations


\dot{Q}_{wall} = -kA\frac{dT(0)}{dx}
\frac{d^2T}{dx^2} = 0
T(0) = 90
-k\frac{dT(L)}{dx} = h[T(L) - Ts]

The Attempt at a Solution



Solving the differential equation and applying B.C.:
T(x) = xC_1 + C_2
T(0) = C_2 = 90
-kC_1 = hLC_1+hC_2-25h]
C_1 = -\frac{h(C_2-25)}{k+hL}

Plugging numbers in:
C_2 = 90
C_1 = -136.8
T(x) = 90-136.8x
\dot{Q}_{wall} = -1.8*30*(-136.8) = 7,387 W

Did I make a mistake or is the book's answer wrong?
 
Physics news on Phys.org
I used a somewhat different approach (underlying equations are of course the same) and got the same answer you did.

I computed the thermal resitance of the wall as L/kA = 7.41e-3 K/W and the equivalent thermal resistance of the convection effect as 1/hA = 1.39e-3 K/W, giving total thermal resistance of 8.80e-3 K/W so dQ/dt = (90 - 25)/8.80e-3 = 7387W.

Just curious - what is your textbook?
 
Awesome thanks, I didn't want to waste any more time redoing this problem looking for a mistake, and my class is just starting the thermal resistance chapter so if I see more problems that have wrong answers I'll do them that way to check.

We're using Heat and Mass Transfer Fundamentals & Applications 4th Ed by Cengel and Ghajar.
 
arent we suppose to take temp. as kelvin here?
 
spree said:
arent we suppose to take temp. as kelvin here?

It's OK to interchange K and C as long as you're dealing with temperature differences.
 
oh ure right. new to the subject, just trying to learn sorry :) btw I personally know professor cengel and i will inform him about this. I will let you know about it. if you suspect any other mistake in the book feel free to ask please.
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top