How Fast Can Water Flow from a Kitchen Faucet on the Third Floor?

AI Thread Summary
The discussion focuses on calculating the maximum velocity of water flowing from a kitchen faucet located on the third floor, given a gauge pressure of 170 KPa at street level. The relevant Bernoulli equation is applied, but there is confusion regarding the definition of P2, with some participants suggesting it should be atmospheric pressure. The correct interpretation of P1 as gauge pressure and the need to adjust P2 accordingly is emphasized. The expected answer for the maximum velocity is 6.8 m/s, but the initial approach to the equation was incorrect. Clarification on the pressure terms is crucial for solving the problem accurately.
lch20yy
Messages
5
Reaction score
0

Homework Statement



water in main pipe at the street level is at a gauge pressure of 170 KPa and is moving with neglibible speed. A pipe connected to the main pipe is used to deliver the water to kitchen located on the third floor of a building, at a 15-m height from the street level. what is the maximum possible velocity with which the water can emerge from an open kitchen faucet?

Homework Equations



p1+1/2 rho G v^2+rho G H = p2 + 1/2 rho G v^2 + rho G H

The Attempt at a Solution



i have the equation p1=p2+1/2(rho)GV^2+(rho)G H
since p1 speed is negligible and height is 0. I am not sure abount what p2 is. is it the atmosphere pressure?
the answer is 6.8m/s, but i can't get the answer. pls help
 
Physics news on Phys.org
lch20yy said:
p1+1/2 rho G v^2+rho G H = p2 + 1/2 rho G v^2 + rho G H
A spare couple of Gs in there.
I am not sure abount what p2 is. is it the atmosphere pressure?
P1 is given as gauge pressure, which means it's the additional pressure beyond atmospheric. So what do you think you should use for P2?
 
ok i got this ... i got the equation wrong
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »

Similar threads

Calculating Velocity of Water Flow in Open Channel
Replies
11
Views
2K
How to Determine Flow Rate in a Pipe Using Fluid Dynamics?
Replies
1
Views
1K
Bernoulli equation / fluid flow / finding height
Replies
6
Views
3K
What Determines the Maximum Height for Water Flow in a Faucet?
Replies
7
Views
5K
Choosing Reference Points in Bernoulli's Equation for Fluid Flow
Replies
2
Views
2K
Doublet flow in Fluid Dynamics between two spheres or cylinders
Replies
0
Views
1K
When will the house be flooded?
Replies
6
Views
4K
What is the speed of air flow in a pipe driven by compressed air for 12 minutes?
Replies
24
Views
3K
Pump used to halve the time taken by fluid to flow out
Replies
2
Views
2K
How High is the Water in the Bottle Based on Fluid Dynamics?
Replies
1
Views
1K

Hot Threads

Recent Insights

Back
Top