Time course of magnetic field formation (spatial distribution of field)

AI Thread Summary
The discussion focuses on the formation and spatial distribution of magnetic fields when an electrical coil is activated. When current flows through a coil, it generates changing currents that emit electromagnetic waves, which propagate at the speed of light. Although a static magnetic field is theoretically never fully achieved, it asymptotically approaches a steady state over time, particularly within a localized region around the coil. The transition to a static field can be approximated as reaching a constant value to a high degree of precision. This understanding highlights the complexities of magnetic field dynamics in response to changing electrical currents.
Gotrobotfrien
Messages
1
Reaction score
0
Hi All,

I've done a quick google, and I can't find anything obvious (first 3 pages) about the formation of magnetic fields, specifically, how does the distribution of magnetic field through space take place as an electrical coil is switched on?

As a secondary question, is it possible to "pinch" a region of space with temporally short, but spatially much more concentrated magnetic field? As in, say a steady state magnetic field generated by a coil is about 1T in the bore, how does it approach this value when switched on? Is there any oscillation (overshoot) in field strength before settling?

Thanks for any insights.
 
Physics news on Phys.org
When you switch on current through a coil, even if it is a DC current, you are going from 0 current to a non-zero current. This is a changing current. Changing currents radiate electromagnetic waves. The wavefront travels out away from the coil at the speed of light. You should be googling terms like "electromagnetic radiation". Many older cell phone antennas are simply little coils of wire with the current being turned on and off so that your voice data is carried away encoded in the radiated waves.

If you are asking how long it takes after switching on the DC current to have a static magnetic field, strictly speaking the answer is: forever. It will take an infinite amount of time for the wavefront to propagate out to the infinite ends of the universe and form a complete static field. What if we care only about points in some local region (say within some radius R) near the coil, and ask how long it takes for the field to become static in this region, the answer is still forever. The fields asymptotically approach a static configuration but technically never reach it. For practical purposes, you could describe the time it takes for the fields to become static as the time it takes to becomes constant to the 5th decimal place (or 6th, or 7th).
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top