How to precipitate Al(OH)3 from potassium aluminate in KOH?

  • Thread starter Thread starter Antwerp
  • Start date Start date
  • Tags Tags
    koh
AI Thread Summary
To precipitate aluminum hydroxide (Al(OH)3) from potassium aluminate (K2Al2O4) dissolved in potassium hydroxide (KOH), one effective method is to lower the pH by adding an acid, which can facilitate the precipitation of Al(OH)3 due to aluminum's amphoteric nature. Seeding agents may also be considered to promote crystallization, although specific agents were not detailed in the discussion. Additionally, alternative methods to achieve aluminum precipitation without altering pH include exploring different chemical reactions or additives that can convert dissolved aluminum into a solid form. The discussion emphasizes the flexibility in the desired aluminum compound, indicating that while Al(OH)3 is a common target, other solid forms of aluminum are acceptable.
Antwerp
Messages
2
Reaction score
0
How to precipitate aluminium hydroxide Al(OH)3 from potassium aluminate K2Al2O4 which is dissolved in potassium hydroxide KOH? Are there any seeding agents which could be used? What will be the resulting compound(s) (ions) of the reaction(s)? Alternatively other methods how to make aluminium precipitate?

Any information on this topic appreciated.

Many thanks!
 
Chemistry news on Phys.org
Hint: aluminum is amphoteric.
 
so adding an acid to the solution?

and what about other ways (without changing pH)? it doesn't necessarily need to be Al(OH)3 precipitated, could be in other form, the important thing is to get aluminium in the form of solid...

thanks!
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top