Mesh generation from an ultrasound image

AI Thread Summary
To generate a mesh from an ultrasound image, Elgen GMSH is recommended as it has the capability to handle this task. The software automatically creates a denser mesh in regions with more scatterers compared to the surrounding areas. Users are seeking guidance on specific algorithms or methods to achieve this mesh generation. Further exploration of GMSH's features and documentation may provide additional insights. Overall, GMSH is a viable option for ultrasound image mesh generation.
elgen
Messages
63
Reaction score
5
Does anyone have a clue on how to obtain the mesh from the ultrasound image? The region of scatterer is automatically more densely meshed than its ambient.

Any software? algorithm? Thx.


Elgen
 

Attachments

  • ultrasound.jpg
    ultrasound.jpg
    50.7 KB · Views: 495
  • mesh.jpg
    mesh.jpg
    86.2 KB · Views: 462
Engineering news on Phys.org

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

A novel compound epicyclic gear system I can't seem to understand
Replies
1
Views
1K
Relaxation times of molecules during sound propagation
Replies
3
Views
3K
Confidence in FEA stress values?
Replies
9
Views
3K
How to Implement Beamforming in Ultrasound Diffraction Tomography
Replies
1
Views
3K
Maxwell Linear Generator (Input Power < Output Power and losses?)
Replies
2
Views
587
Numerov method on a exponential grid mesh
Replies
6
Views
3K
Looking for feedback on selecting a good topic
Replies
1
Views
1K
Medical B-mode Ultrasound Image - what does it represent?
Replies
2
Views
7K
How does ultrasound imaging work?
Replies
2
Views
3K
B Optimizing Exposure Times: Balancing Efficiency and Image Quality
Replies
41
Views
6K

Hot Threads

Recent Insights

Back
Top