Converting Measurements for Paint: A Unit Conversion Challenge

  • Thread starter Thread starter warnexus
  • Start date Start date
  • Tags Tags
    Unit
AI Thread Summary
The discussion focuses on converting measurements for paint, specifically from square feet per gallon to square meters per liter. The initial conversion from feet to meters is established, followed by a conversion from gallons to liters, highlighting the importance of using the correct conversion factors. Participants clarify the need to perform the area conversion twice to achieve accurate results. The final conversion yields approximately 9.82 m² per liter, with a note on the potential differences between U.S. and UK gallon measurements. The conversation emphasizes the complexities involved in unit conversions in physics problems.
warnexus
Messages
90
Reaction score
0

Homework Statement



paint.png


Homework Equations



1 Liter is 1000cm^3
1 foot is .3048m
centi is 10^-2

The Attempt at a Solution


convert ft to m
400ft * .3048m/1ft = 121.92m
convert m to cm
121.92m is 12192 cm
12192 cm is 12.192 Liter
1 gal = 3.78541 L

I look at the appendix but there is no equation for f^2 or m^2/L. Need help. =]
 
Last edited:
Physics news on Phys.org
You have units of ft^2/gallon and you need to convert to m^2/L.

You have already done the ft to m conversion, now you need to do gallons to litres.
 
Nytik said:
You have units of ft^2/gallon and you need to convert to m^2/L.

You have already done the ft to m conversion, now you need to do gallons to litres.

There's got to be a way in a physics problem. Here's a picture of the problem. =]
 
Sorry, I think I ninja-edited while you were quoting (perhaps). Read it now and it should be fine.
 
Nytik said:
Sorry, I think I ninja-edited while you were quoting (perhaps). Read it now and it should be fine.

400ft^2/1 gal * .3048m/1ft = 121.92m^2/1 gal

121.92m^2/gal * 1 gal/3.78541 Liter = 121.92m^2/3.78541 Liter. Now divide 121.92/3.78541 Liter to turn it into 1 liters and you get 32.2 m^2/ 1 Liter.
 
Not quite, remember it's ft^2 and m^2 so you have to do that conversion twice.
 
oh boy. let's see. i think I found the problem. here's the fixed conversion!

400ft^2/ 1 gal * .3048m/1ft = 400 ft/1gal * .3048 m * .3048m/1ft * 1 gal/3.7854L = (400)(.3048m)(.3048m)/(3.7854L) = 37.161216m^2/3.78541 L. To make it one liter it would be 9.8169 m^2/1 L
 
Looks good to me. If that isn't working then double-check where you got the gallon-litre conversion; I know that a US gallon is different to a UK gallon and I don't know which countries use MasteringPhysics either!
 
whew that was a lot of work! i forgot to round but its 9.82m^2/1 Liter. I got the gallon to liter conversion from google so it could be U.S and i got it correct. Thanks for the guidance! This problem sure stressed me out! =]
 
Back
Top