Build Definition and 466 Threads

What do you think? *CPU/Core i7 3770K Ivy Bridge Quad Core processor *Motherboard/MSI Big Bang Mpower Z77 *Memory/G Skill RipJaws X Series 16GB (2x8GB) 1600MHz 240pin dual channel memory kit *GPU/MSI GTX 680 TwinFrozr *PSU/Corsair HX850 850W power supply *Coolermaster HAF-XM Mid Tower Case...

Ok, so my 8 year old son started playing ice hockey and unfortunately to get good, you need lost of ice time which is expensive and hard to come by. I am trying to figure out how to make a homemade ice rink this winter. I live in south NJ and the winters are not cold enough to have a lasting...

Hi, I'm 15 and I want to build a particle accelerator (probably in my backyard). I don't know much about physics yet, but I'm learning. I realize that this is a long-term project (my estimate is about 2 years), but I really want to do it. I don't just want instructions or anything like that, I...

Good evening ladies and gentlemen, I'm very interested in applying to grad school, in a yet-undecided subfield of theoretical physics. For one looking to build up a grad school resume, what can I do/learn while an undergrad (four semesters left)? I'm not looking for the stock (though still...

I know that in undergrad (at least in my school), mechanical engineers usually have their projects on things like robots, cars, UAV, trebuchets, etc. Electrical engineers usually build clocks, calculators, data encrypters, wireless systems, ALU, motors, generators, lamps etc. Civil engineers...

i want to build an inverter with solar panel can someone assist me on how to use thyristor to buffer it,and how to connect it to the solar which is 500wattts.my inverter is 5kva

How did gravity build astronomical objects that rotate? It seems to me a safe bet, supported in part by observation, that the heterogeneous assembly of known astronomical objects comprising the observed universe, whose contents range from minor planets (one named for my mother) to the recently...

Optical traps for refractive colloidal particles (latex) of around 1 micron always employ a laser ligth tipically of 30 mW or even less. I have never seen a report of an optical trap using a non-laser light source. I wonder if is possible to build a non-laser light optical trap and if not why. I...

...build a generator that uses renewable energy, what type of energy would you invest in?

This is for a novel I'm writing. In it, the Earth has been separated from the Sun. At this point there is still an atmosphere (at perhaps 50% of normal pressure) but the temperature has fallen to somewhere around -150 centigrade. My question is this: Could a technologically savvy private...

I need to make a synchronous demodulator using basic components (op-amps, etc...) and I was wondering if anyone has currently made one. I want to avoid using an custom IC chip unless there is one available. I was looking into the Analog's AD630 and TI's INA143 (which they claim can be used as...

I have methane leaking into a gas container from a connected reservoir cylinder. If the volume of the container is fixed and the initial pressure is known (say atmospheric), how can I determine the leak rate from the pressure build-up versus time relationship. The pressure versus time profile...

Im 15 from the U.K and i want to do something with my life. So i jumped to the conclusion of building something, i didnt want something like a cyclotron, but i wanted to start of with something easier such as a electron my goal is to try and build an electron gun. I want to try and make this...

Hello, all. I've heard of a few renowned scientists having build small particle accelerators in their garages as teenagers, and I've wondered how I could do the same. Obviously, I'm not looking for anything LHC-scale, but rather a few feet in circumference. I've seen similar projects on the...

This device was sitting outside my work area 2 weeks ago. I am enjoying working on devices which are at the forefront of oceanographic research.

Hi i work at mission central tearing down computers and other electronics plus i look for electronics at the curb that people threw out. I was wondering if i can make a wire strippers that will strip many size wire and also feed it through by itself or with a little help. I want to make it with...

I have a beefy budget to build a new gaming PC and I can't decide between the Radeon HD 7970 and the Nvidia GTX 680. I read that the GTX 680 uses only ~200W of power and is noticeably faster than the Radeon card, even though it has 3/4 the amount of transistors than the 7970. Should I wait...

Well, the thing is that since one year or more I'm trying to find a non toxic compound that can be done mixing water with "something", I need that the result of that has "like gum" properties, or a high density foam (like a hard mattress). I don't know much about chemistry but I think there must...

hi, I'm new in this forum, i was wondering how to build an electron canyon? does somebody knows?

Hello, Recently I have been trying to build a spark getter. The idea is that a high voltage is applied to a capacitor consisting two titanium plates, once the breakdown voltage is reached, a spark is caused, and small particles of titanium (our getter) come off the anode and the cathode. I...

Hi there! I hope someone can help me ... I'm trying to build an electromagnet to use in a system inspired by Bob Beck and electro-medicine. I have a friend building me a circuit to generate a pulsed wave to drive an electromagnet. It's my job to build the electromagnet, but after several...

I'm looking at building a computer that is capable of gaming and intensive CAD software and would like some advice. Two CPU's I'm currently looking at (however other opinons are welcome!) Intel: I5-2500K quad core (3.3Ghz 3.7Ghz turbo) AMD: FX-8120 8 core (3.1Ghz) I am looking at the Radeon...

I would like to build an electro magnet capable of causing piano strings to vibrate without the strings being struck first. As long as the hammers are up, the strings would vibrate on their own accord. An E-bow, used by guitarist for the same purpose, will (sort of) work on a limited range on...

What kind of engine do I need to build a "flying board"? Hi there, I'm pretty much new here and I've been making lots of research about engines, ion engines, turbines etc. But I still don't understand. I want to build a steel board, since I have the facility to work with any kind of metal...

Hi, I'm trying to build an electrostatic spray system. They are commonly used for spraying cars and pesticides onto fields of crop efficiently and easily. The spray is given a negative or positive charge that makes the spray attracted the opositely charged target (car or plant etc), ensuring...

I would like to build an antenna that will be used in a very remote area to improve our cell signals. We have access to the GSM 850 (824.2 - 849.0 Uplink | 869.2 - 894.0 Downlink). I need help in calculating the antenna length based on the frequency and need advice on the most effective...

Ok , so I was wondering if you could legally build a cyclotron accelerator , I am fourteen years old , so if there are any permits required , would they be accessible by a fourteen year old? , I realize it has the potential to produce ionization radiation , and that's the part that i think i...

The electromagnet stick always head N/s, no matter how fast the rotation of the shell of the disk is, you just need to control the input voltage of it, and it will not get heavy if the Magnetic stronger. I think the input higher voltage can make it head with power and hard to change the...

Is it even possible to do so? I used a thick paper sheet with 1x5 mm slits 5mm apart with a normal flashlight (just to do a rough test). I saw what looked like the patches of light with darkness in between, but it was very, very faint.. Is it possible to do an effective model with easy-to-get...

Okay well my issue is from a basic problem. The problem is you are given an unlimited number of 10 Ohm resistors. They can only handle 1 watt of dissipation and you need to create a circuit that has a total resistance of 10 Ohms, and has a power dissipation of 5 Watts. They are actually looking...

Need to Build Two Circuits That "Sense" Proximity To Eachother Hi all, I am trying to build two circuits as part of an experiment that can "sense" proximity to one another. So basically, as they the two circuits get physically closer to each other (starting at a range of maybe 10-20ft), an...

Homework Statement A tailing pond at a mine contains a million liters of water and 10 kg of the very toxic substance mercuric chloride (HgCl2), mixed evenly throughout the water in the pond. Water from the mining operation flows into the tailing pond at a rate of 10 liters per second, and...

If someone wants to go and (not just build), but market a flying car and make it for everyday use just like a regular car,you have to go to an Ivy League School. It seems depressing because for some people just being practical is annoying and sad itself. (Notice I said some people because...

Hey. I am a freshman in high school, and iv'e been reading about building a cyclotron. I have the basic principles understood but can someone explain how exactly i would assemble on, and the mathematics behind it. ALso and information about how the fields interact would be phenomenal. I have...

Hi, In SUSY we introduce chiral superfield, vector superfield, then build some invariants and get the SUSY lagrangians which after decomposition into normal fields (F and D terms) gives us for example ordinary QED plus some other terms. And we call this SUSY-QED. I have following question...

What kind of job in the science or engineering field would have you build stuff and do experiments. I talked to a guy that worked as an engineer, and he said they had to do a lot of paper work to do anything and he said it wasn't fun. And another guy I talked too said at nuclear power plants...

what would you put into your eco friendly car.

Often people asks how to obtain a positive definite matrix. I would like to make a list of all possible ways to generate positive definite matrices (I consider only square real matrices here). Please help me to complete it. Here M is any matrix, P any positive definite matrix and D any...

Hey all Im trying to build a small railgun capable of launching a projectile(20-40g) to about 400km/h. Attached is a excel file. It is a sort of simulation. Cells in red must get values from the table. Cells in Blue must be typed in by user. Cells in Green list the Current/Mass needed...

Hi my friends I wanted to build a ion thruster for some research projects. I searched in net and find out that there are a lot of papers relating to design and increasing performance of ion thrusters, but i couldn't find a build paper or site! Please if any of you knew about build requirement...

Okay, reeling from a defeat in the stellar ring with a self gravitating mass of gas that imploded at a massive temperature when all I wanted it to do was hang around nice and calmly while I put gravitating bodies in it...now I move on to a slightly more conventional model. I do plan to do most...

Any tips on how to start (I've already looked at www.fusor.net) and what the projected costs would be? I'm looking to complete this by the end of the year.

I will be entering university in an aerospace engineering program next year but I want to get a head start on it right now. What I mean by that is start building basic rockets and planes, or even more basic than that, I don't know. Why I am here is to ask for guidance on where to start. I...

Hi everyone For the past few months I have been learning about the nucleus and the nuclear shell model. The experimental evidence for a shell structure is overwhelming and easy to understand. It is also quite straight forward to obtain the correct shell closures (magic numbers) using a 3d...

Hey, so i'll just start this by saying that any/all info i present here may be wrong, I've only got physics 20 under my belt right now but I've been doing a ton of research, so if i seem like i don't know what I'm talking about, it's because i probably don't. I'm in grade 12, and I'm interested...

I'm trying to figure out what I would need to do in order to make something that could quickly store/build up energy and then disperse it completely once the build up was complete; within a few seconds passing. I'm not really looking for the quantity of energy at the moment but more of the speed...

hello to all, im new here, I am just searching someone can mayb help me with my big sitution, i have a closet size: height: 1.47m, width: 75cm, depth: 58cm. there is a very hot MH light bulb 400W, with bellows and vents. and my temperture is around 32-36C! i looking for way too cool down...

Oddly enough, it's for a science fair :) Anyway, I joined the Science Club at my high school earlier today and I learned that we'll be entering our a science fair, winners of which will go to regionals. I read Michio Kaku's (forgive any misspellings) book Hyperspace and it somewhat motivated...

I am trying to understand how some of the standard ICs work in terms of simple components I understand, i.e. transistors, resistors, capacitors, and inductors (although I doubt there are any inductors in an IC.) I was trying to build and op amp from transistors, resistors, etc, and I noticed...

If you sport some X-mas grade wool socks in the typical striding motion across a carpet floor... what causes that build up of charge to stay in the body and leave in such a (seemingly) similar fashion to lightning dispersing into the ground when it doesn't just "wind down"? My best guess has to...