A question about electric energy

AI Thread Summary
In a 6-volt battery, as charges move from the negative to the positive terminal, they convert potential energy into kinetic energy when a current flows in a closed circuit. In an open circuit, potential energy remains unchanged due to the lack of a complete path for current. In a short circuit, where resistance is negligible, potential energy is rapidly converted to thermal energy due to high current, resulting in heat generation. Charges do not gain or spend energy; they simply convert it from potential to kinetic energy while also producing heat through collisions in the conductor. Overall, the energy transformation in circuits depends on the circuit's configuration and resistance.
Ahmad Syr
Messages
20
Reaction score
0
Hi guys
I know that in a 6 volt battery 1 columb of charges gain 6 joules of energy do they gain potential or kinetic energy as they move from the negative terminal to the positive terminal ?
And how different the energy in Ac electro motive force
 
Engineering news on Phys.org
Regarding your energy conversion question, it is entirely dependent on the circuit. Say for example you have your battery and have no wires to complete the circuit. A circuit that isn't closed is referred to as an open circuit. A circuit that has infinite resistance. In this case, your potential energy remains as potential energy.

Now say for example you have a closed circuit that creates an electric current. Depending on your circuit, most of your energy is converted from the batteries stored energy (potential energy) to heat (thermal energy). However, the rate at which this energy is converted is dependent on the circuit.

Let says you have a closed circuit that has ZERO resistance. This is known as a short circuit. In a short circuit, you theoretically have infinite power consumption, and remember, power is simply the rate at which energy is consumed or produced. So for an application that has infinite power consumption (or an infinite rate of energy consumption), you have the batteries potential energy instantly being converted to thermal energy. Things get really hot! If you ever short circuit a small battery with a piece of tin foil, you will notice that the piece of tin foil gets very warm. This is a perfect example of electric potential energy is converted to thermal energy.

Someone correct me if I'm wrong, but you could also say that the potential energy is being converted to kinetic energy due to the mass and velocity of electrons. But when dealing with circuits, the main concern is typically the thermal energy produced.

Regarding your second question of AC power, could you be more specific what you are asking?
 
Nope I meant that when negative charges are attracted to the positive terminal do they spend or gain energy
 
Ahmad Syr said:
Nope I meant that when negative charges are attracted to the positive terminal do they spend or gain energy

Okay let's try this again sticking with the short circuit example.

In a short circuit, you theoretically have zero resistance. Because there is very little resistance you get a high current. Current is simply the flow of charge past a given point within a certain time increment. The SI unit of current is the Ampere which is defined as 1 Coloumb of charge per 1 second flowing pass a given point.

The charges don't spend or gain energy, they simply convert energy. When the charge is located in the battery, the energy is potential energy. When you have a current within a circuit, that potential energy is converted into kinetic energy because you now have moving charges.

Going back to the short circuit, you have a circuit that draws a very high current. Because the current is high, you get a lot of collisions between the moving charges and the conductor. This generates heat.

Under ideal conditions where there are no power losses due to heat, the answer to your question would be that the charges do not spend or gain energy, they simply have their potential energy converted to kinetic energy. Realistically however, the moving charges will produce heat and some energy of the charge has now been lost.
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top