Acceleration, magnitude, displacement.

AI Thread Summary
The discussion revolves around calculating the acceleration and displacement of a spaceship that accelerates from 150 m/s to 1500 m/s at an angle of 55 degrees over 25 seconds. For part a, the user attempted to find the acceleration components in the x and y directions but struggled with the calculations, particularly in determining the correct values for delta velocity and time. They calculated the acceleration as 54 m/s² but questioned whether they should reverse the velocity values. In part b, they used the average velocity formula to find displacement but seemed confused about the results. Clarification on the correct approach to these calculations is sought.
mimibajiduh
Messages
15
Reaction score
0

Homework Statement


a spaceship is observed traveling in the positive x direction with a speed of 150m/s when it begins accelerating at a constant rate. the spaceship is observed 25s later traveling with an instantaneous velocity 1500m/s at an angle of 55 degrees above the x+ axis. a.) calculate the acceleration of the spaceship in the x direction, Ax, and in the y direction, Ay, during 25 seconds. what was the magnitude of the spaceship's acceleration during the 25 seconds? b.) what was the magnitude of the displacement of the spaceship after 25 seconds?


Homework Equations


a= delta v/ delta t

X= 1/2(Vo+V)t


The Attempt at a Solution



for part a i attempted it but i didnt get anything right:

cos55((150m/s)/(150 m/s)) = .0574 in positive x direction.
sin55((150m/s)/(150 m/s)) = .0819 in positive y direction.

a= delta v/delta t
1500-150/25-0 = 1350/25 = 54 m/s^2

magnitude: 1500^2/150^2 =150^2/150^2 +b^2
= sq. root of 2250000-22500 = b
b= 1492 m/s

part b)
X= 1/2 (Vo+V)t
1/2(150+1500)25s
X= 20625 m/s^2 in positive x direction.
 
Physics news on Phys.org
please help me out with this. i want to know what i did wrong.
 
i was thinking for the acceleration part, maybe i am supposed to switch the values? so it would be 150-1500/0-25?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top