AP Physics C: Solving Energy Homework Equation

AI Thread Summary
An object with a mass of 1 kg is launched at a 42° angle with an initial speed of 180 m/s, facing a drag force proportional to its velocity. The user has calculated the initial velocity components but struggles with the effects of drag on the object's motion. They are attempting to set up the equations of motion using F=ma and integrating to find the maximum height and corresponding energy, but face challenges with the changing retarding force. The user seeks confirmation on whether the problem can be solved with the provided information and assistance in overcoming the difficulties with the differential equations. The discussion highlights the complexities of incorporating variable drag into energy calculations.
SHawking
Messages
12
Reaction score
0

Homework Statement


First, this is not an assignment, per se, it is for my own help, and If someone could help me work it through that would be much appreciated.

An object of mass 1 Kg is launched at an angle of 42° from the horizontal at 180 m/s. A force of drag acts on it that is dependant on its velocity, with the force being equal to -.012V. What energy does the ball have when it reaches its maximum height?

Homework Equations


I solved the initial components in both the x and y directions and got 133.8 m/s and 120 m/s.
Other equations:
E=K+U
K=.5mv^2
U=mgh
x(t)=x+(integral)v(t)dt
I am sure I am missing some, which is part of my problem.

The Attempt at a Solution



I started with F=mdv/dt
Integrated to
Integral from Vi to V (dv')/fv'=t/m which didnt help much.
I then tried
mdv/dt=mg-kv (kv being my -.012v)
But, was having trouble with my signs, and it didnt look like it was coming out right.

THe retarding forces in the y direction are -mg-.012v
and the x direction is only -.012 v

Going to F=ma I tried various substitutions and again, had little luck.

I know I wiill need to solve the height at which the velociy is zero, using only the y component to get potential enrgy, and also find the x velcity at this time to get the kinetic energy and then add them up to get the total energy. The thing that is giving me difficult is the retarding force as a function of the velocity, so the force will be constantly changing.

If anyone could help that would be very much appreciated!
 
Last edited:
Physics news on Phys.org
I have been working on it, and got stuck, though it seems like this route would work.
Using F=ma and trying to solve for the downward force in the y direction I get
F=-mg-.012v
F=-mg-.012(dx/dt)
Integral of F dt= -mg-integral .12 dx
From the looks of this, I think that setting up the differential equation was not the right step, and am still unsure where to go from here.
 
Could someone assure me that this problem is possible with the given information. I keep getting two variables, both unknown and no good substitutions.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top