Applied force and the force between boxes?

AI Thread Summary
The problem involves three boxes with masses of 5.0 kg, 3.0 kg, and 2.0 kg, where a 50 N force is applied to the 5.0 kg box. The acceleration of the system is calculated to be 5 m/s², leading to contact forces of 25 N for the 5 kg box, 15 N for the 3 kg box, and 10 N for the 2 kg box. The confusion arises regarding the contact force between the 3.0 kg and 2.0 kg boxes, with calculations suggesting it could be 10 N. Ultimately, the correct contact force between the 3.0 kg and 2.0 kg boxes is confirmed to be 10 N. Understanding the distribution of forces and acceleration is key to solving the problem correctly.
Briann
Messages
2
Reaction score
0

Homework Statement


Three boxes rest side-by-side on a smooth, horizontal floor. Their masses are 5.0 kg, 3.0 kg, and 2.0 kg, with the 3.0-kg mass in the center. A force of 50 N pushes on the 5.0-kg mass, which pushes against the other two masses. What is the contact force between the 3.0-kg mass and the 2.0 kg mass?

a) 25 N
b) 10 N
c) 40 N
d) 0 N


Homework Equations



Maybe F = m a?



The Attempt at a Solution



[ 5 kg ] [ 3 kg ] [ 2 kg ]

I would think that gravity would diminish the applied force of 50 N.

Fg = m g
Fg = 5 kg * 10 m / s^2
Fg = 50 N

So the 50 N force would be subtracted from the applied force of 50 N, leaving 0 N, right?

I'm confused. Can someone help me?

Thank you!
 
Physics news on Phys.org
50 Newtons here is pushing 10 kg. so you know the acceleration of the system. Since each box will have an acceleration, and a different mass, you have what you need to calculate the applied force for each individual box
 
Ah, so the acceleration of the system is 5 m/s^2.

Fmass1 = m * a = 5 kg * 5 m/s^2 = 25 N
Fmass2 = m * a = 3 kg * 5 m/s^2 = 15 N
Fmass3 = m * a = 2 kg * 5 m/s^2 = 10 N

Because the contact forces between mass2 (the 3-kg mass) and mass3 (the 2-kg mass) are 15 N and 10 N respectively, does that mean that I should subtract 15 and 10 and get 5?

Or is 10 N already correct?

Thanks again!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top