Are colors a result of electrons or the atoms themselves?

  • Thread starter Thread starter TofuSubmarine
  • Start date Start date
  • Tags Tags
    Atoms Electrons
AI Thread Summary
The discussion centers on the science of color perception, specifically the mechanisms behind how atoms interact with light. The initial inquiry focuses on whether the entire atom or just its electrons absorb wavelengths of light other than blue. It is clarified that electrons are primarily responsible for this absorption, as they can move to higher energy levels when they absorb specific wavelengths. The conversation also touches on the concept of color perception, emphasizing that it is not solely determined by the wavelengths entering the eye. Edwin Land's theory of color constancy is mentioned, highlighting how color perception can be influenced by lighting conditions. Additionally, it is noted that unreflected light may be converted into heat, which could be re-emitted as infrared radiation or dissipated into the environment.
TofuSubmarine
Messages
1
Reaction score
0
Hi Everyone.

I am confused about the science of colors. I will use an example in my question. I know that the color blue is caused by atoms reflecting blue wavelengths of light and absorbing other wavelengths of light. What I don't understand, however, is which part of the atom actually absorbs the other wavelengths of light? Does the atom as a whole absorb the wavelengths other than blue, or do its electrons do that? If the atom as a whole absorbs these wavelengths of light, how does it do that? And if electrons are responsible for absorbing these wavelengths of light other than blue, why don't they emit these colors when they drop back down to a lower energy level?
 
Chemistry news on Phys.org
This is probably not the answer you are looking for because it has nothing to do with atoms, but color is perception and is not as straightforward as what wavelengths are entering your eye. You might want to look into Edwin Land's 'color constancy' theory:

 
  • Like
Likes artyb
Here's a link to an article. I didn't realize that he was able to get color vision by illuminating with just two wavelengths of 579 and 599 nm. Pretty cool.

http://www.greatreality.com/Color2Color.htm

Edit: forgot link!
 
I would think that the unreflected light is converted into heat, which could be re-radiated as infrared or conducted away into the surroundings.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top