How Do Astronauts Measure Their Mass in Space?

  • Thread starter Thread starter bobbarkernar
  • Start date Start date
  • Tags Tags
    Shm
AI Thread Summary
Astronauts measure their mass in space using a spring oscillation method instead of traditional scales. An astronaut attaches a spring to her belt and is pulled away from the wall, allowing her to oscillate. The discussion focuses on deriving the position equation for the spring's length and finding the astronaut's speed when the spring's length reaches 1.2 meters. Participants suggest differentiating the position equation and determining the corresponding time to calculate velocity. The correct position equation is identified as 1 + 0.4 sin(2π/T * t), with T estimated to be 3 seconds.
bobbarkernar
Messages
48
Reaction score
0

Homework Statement



Astronauts in space cannot weigh themselves by standing on a bathroom scale. Instead, they determine their mass by oscillating on a large spring. Suppose an astronaut attaches one end of a large spring to her belt and the other end to a hook on the wall of the space capsule. A fellow astronaut then pulls her away from the wall and releases her. The spring's length as a function of time is shown in the figure.
http://session.masteringphysics.com/problemAsset/1001073/9/knight_Figure_14_36.jpg

What is her speed when the spring's length is 1.2 ?


Homework Equations





The Attempt at a Solution



i tried to write the position as x(t)= .6+1.4sin((2pi/T)t)
 
Physics news on Phys.org
The center of the sine wave is at 1.0m, not at 0.6m

Re-write the position equation with a number for T, then differentiate and figure out what phase to plug into the velocity equation. You're good to go!
 
bobbarkernar said:

Homework Statement



Astronauts in space cannot weigh themselves by standing on a bathroom scale. Instead, they determine their mass by oscillating on a large spring. Suppose an astronaut attaches one end of a large spring to her belt and the other end to a hook on the wall of the space capsule. A fellow astronaut then pulls her away from the wall and releases her. The spring's length as a function of time is shown in the figure.
http://session.masteringphysics.com/problemAsset/1001073/9/knight_Figure_14_36.jpg

What is her speed when the spring's length is 1.2 ?


Homework Equations





The Attempt at a Solution



i tried to write the position as x(t)= .6+1.4sin((2pi/T)t)

Yes...Keep going. To find the speed you have to differentiate your equation, find the time corresponding to a position of 1.2 , plug that time in your equation for the velocity and get your answer. (you may read the period T from your figure)

Patrick

EDIT: I just noticed on the figure that the oscillation is from 0.6 to 1.4, so the equation should be 1+ 0.4 sin ({2 \pi \over T} t )
 
Last edited:
so i should differentiate 1+ 0.4 sin ({2 \pi \over T} t )
for t and Tshould be 3??
 
bobbarkernar said:
so i should differentiate 1+ 0.4 sin ({2 \pi \over T} t )
for t and Tshould be 3??

Yep, that's the next step.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top