Block on a vertical spring, finding frequency

AI Thread Summary
The discussion focuses on a physics problem involving a block on a vertical spring and addresses two main questions: the compression of the spring when at rest and the frequency of oscillation when the spring is further compressed. The initial compression is derived as x = (M+m)g/-k, but it is clarified that the mass M does not affect the spring's behavior, leading to the correct compression being mg/k. For the frequency of oscillation, it is emphasized that frequency is generally independent of amplitude, but in this case, the extra compression must be accounted for in the equations of motion. The final equation of motion incorporates the resultant force and Newton's second law, leading to a differential equation that describes the system's dynamics. Understanding these principles is crucial for solving the problem accurately.
laurenm02
Messages
21
Reaction score
0

Homework Statement


A block of mass m is on a platform of mass M, supported by a vertical, massless spring with spring constant k.

When the system is at rest, how much is the spring compressed?
When the spring is pushed an extra distance x, what is the frequency of vertical oscillation?

Homework Equations


F = -kx

The Attempt at a Solution


For the first question, I set F = mg = -kx, where m = (M + m), and found x = (M+m)g/-k

For the second part, I'm not sure how to set it up. I first thought that frequency is independent of amplitude, but I was told that I have to first write a new second law equation and then find an equation of motion.
 
Physics news on Phys.org
Frequency will not be independent of amplitude, because the frequency depends on the force exerted by the spring, which in turn depends on the amplitude of the compression. So yes, you'll have to write out a new second law equation taking into account the extra compression.
 
sk1105 said:
So yes, you'll have to write out a new second law equation taking into account the extra compression

Can I get a little guidance on this? I'm not sure how to set it up.
 
Hi laurenm02! :)

sk1105 said:
Frequency will not be independent of amplitude, because the frequency depends on the force exerted by the spring, which in turn depends on the amplitude of the compression. So yes, you'll have to write out a new second law equation taking into account the extra compression.

Sorry, but frequency is independent of amplitude.

laurenm02 said:

Homework Statement


A block of mass m is on a platform of mass M, supported by a vertical, massless spring with spring constant k.

When the system is at rest, how much is the spring compressed?
When the spring is pushed an extra distance x, what is the frequency of vertical oscillation?

Homework Equations


F = -kx

The Attempt at a Solution


For the first question, I set F = mg = -kx, where m = (M + m), and found x = (M+m)g/-k

For the second part, I'm not sure how to set it up. I first thought that frequency is independent of amplitude, but I was told that I have to first write a new second law equation and then find an equation of motion.

The mass M should not be included. It does not matter whether the spring rests on a platform of mass M or directly on the ground.
What matters, is that we have a mass m that is supported by the spring.
So the compression at rest should be ##\frac{mg}{k}##.

Now suppose we compress the spring by an additional amount ##x##.
Then the resultant force becomes ##F_{result} = k(x_0 - x) - mg##.
Newton's second law states that ##F_{result} = ma##.
So we get that:
$$ma = k(x_0 - x) - mg$$
Or, written as a differential equation:
$$m\frac{d^2x}{dt^2} = k(x_0 - x) - mg$$

Are you supposed to be able to solve such an equation?
 
  • Like
Likes Greg Bernhardt
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top