Brewster's Angle: Light in Ethanol to Crown Glass - Significance

AI Thread Summary
Brewster's angle is the angle of incidence where reflected light is completely polarized, occurring at approximately 48.2 degrees when light travels from ethanol (n=1.36) into crown glass (n=1.52). This angle is significant because it maximizes the polarization of light, which is crucial in various optical applications, such as polarizers and anti-reflective coatings. The relationship between the angles of incidence and refraction at Brewster's angle leads to the sum of these angles equaling 90 degrees, indicating complete polarization. Understanding Brewster's angle is essential for designing optical devices that utilize polarized light effectively. The discussion highlights the practical implications of this phenomenon in optics.
physicsgal
Messages
164
Reaction score
0
question:

'light travels from ethanol into crown glass. what's the brewster's angle?' and what is the significance of this angle?'

so i have:
nr = 1.52 (crown glass
ni = 1.36 (ethanol)

so it's 1.52/1.36 tan-1 = 48.2 degrees?

and what is the significance of 48 degrees?

any help is appreciated. :wink:

~Amy
 
Physics news on Phys.org
They're not asking what is the significance of 48 degrees. They're asking what is special about Brewster's angle. For example, what practical optical devices take advantage of the Brewster's angle phenomenon?
 
k.. just reading the question here, in my first post i just wrote the short version of the question. is says:

..."what is the significance of this angle of incidence?"

sorry for any confusion..

~Amy
 
The Brewster's angle is the angle of incidence at which some phenomenon is at its maximum. If you can find the formula, you should be able to find the phenomenon.
 
here's what i wrote:
Note: 0 = theta

'sin 0R = ni(sin 48.2)/nR
0R = 41.8 degrees

the angle of incidence is important because (0B = 48.2) + (0R = 41.8) = 90 degrees. the angle of 90 degrees indicates the reflected light is completely polarized parallel to the interface.'


~Amy
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...

Similar threads

Replies
6
Views
2K
Replies
3
Views
2K
Replies
2
Views
4K
Replies
4
Views
3K
Replies
1
Views
3K
Replies
2
Views
10K
Back
Top