Building a Small Closed Wind Tunnel: Resources & Info

AI Thread Summary
The discussion centers on finding resources for building a small closed wind tunnel for a school project. Participants emphasize the importance of understanding specific requirements, such as speed range and test section size, before proceeding with design. Suggestions include consulting textbooks like "Fundamentals of Aerodynamics" and existing online resources, including NASA and university archives. There is also a query about dimensioning honeycomb structures and localized pressure loss coefficients. Overall, the conversation highlights the need for foundational knowledge and targeted research in wind tunnel design.
Xander141
Messages
3
Reaction score
0
Greetings,

for the school I must find some information about the building of a small close wind tunnel .

Some one know where to find it?

Good day!
 
Engineering news on Phys.org
Xander141 said:
Greetings,

for the school I must find some information about the building of a small close wind tunnel .

Some one know where to find it?

Good day!


Don't expect a magic answer already designed for you. Just consider your requirements and have a look at wind tunnels in general for inspiration.
 
There is a lot more that goes into designing a wind tunnel than just saying "I need to design a wind tunnel." Even if one if us wanted to do your homework for you we couldn't because you have provided no information.

What speed range do you want your tunnel to operate in? What kind of unit Reynolds number do you want to achieve and under what flow conditions? How large do you want your test section?
 
Last edited:
I'm sorry,

I don't search for one who can do my homework... :)

I only need if there is a Institute or a University that I don't have already find it.

At the moment I don't have the user requirement, so I can't say nothing.

I've already found the NASA site and the Loughboroug University archive.

Some one has another idea?

Bye
 
Well depending on how much you already know about aerodynamics, you may want to start simple, such as with a textbook such as "Fundamentals of Aerodynamics" by Anderson.
 
Thank you for the infos.

I read some documents, but I don't find nothing about how to dimension the Honeycomb,

I found only something about the dimensioning the screen, do you think it is the same?

I tried searching the localised pressure lost but I don't know how to find the coefficent K.

See you
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top