Calculate Charge on Each Sphere: Force and Total Charge Given

  • Thread starter Thread starter jmb07
  • Start date Start date
  • Tags Tags
    Charge Force
AI Thread Summary
To determine the charge on each of the two metal spheres with a total charge of 6.63E-6 C and a repulsive force of 26.9 N when 6 cm apart, the force equation F = (k * q1 * q2) / r^2 can be used. By substituting q1 with (6.63E-6 - q2), the equation simplifies to F = k * (6.63E-6 - q2) * q2 / r^2, allowing for the calculation of q2. The resulting equation is quadratic in form, indicating that the quadratic formula may be necessary to solve for q2. Once q2 is found, q1 can be easily calculated as the difference from the total charge. This approach effectively reduces the problem to a single variable equation.
jmb07
Messages
27
Reaction score
0
total charge of 6.63E-6 C distributed on 2 metal spheres. When the spheres are 6 cm apart, they each feel a repulsive force of 26.9 N. How much charge is on each sphere??

I know that F=(k x q1 x q2)/(r x r)

Im not exactly how to solve for these when i don't know either one of them to solve for one another. How should i go about this??
 
Physics news on Phys.org
You can use the fact that q1+q2=6.63E-6. Use it as your second equation.
 
how would i relate q1 to q2? Like i understand that the two added together is the total charge.
Should i say that q2 = (F rxr)/(k x q1)
and q1 = 6.63E-6 - q2

I try plugging the relations in but i can't seem to put it all together for some reason
 
If
Q_1+Q_2=6.63e^{-6},

then
Q_1=6.63e^{-6} - Q_2

Substituting that back into your Force equation:

F=k\frac{(Q_1)(Q_2)}{r^2}

F=k\frac{(6.63e^{-6} - Q_2)(Q_2)}{r^2}

Solve for Q_2. In this way, you have used the value of Q2 to state the value of Q1 and your equation is then only dependent on the one variable, Q2, instead of two. After finding Q2, you should be able to figure out Q1 in one step.
 
thanks! I think i am having an algebra block though haha. So,
(6.63E-6 - q2)(q2) = (Frxr)/k

Do i need to use the quadratic equation to solve for q2 or is there a more simple way i am missing?
 
It appears to be unavoidable. It's not exactly difficult =)
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top