Calculate Extra Gasoline in kg with Density and Expansion Rates

  • Thread starter Thread starter cutegirl1980
  • Start date Start date
  • Tags Tags
    Fluid
AI Thread Summary
The density of gasoline is 0.730×10^3 kg/m^3 at 0ºC, and its coefficient of volume expansion is 9.60×10^-4 (ºC)-1. When purchasing 10.0 gallons of gasoline at 0ºC, it occupies 0.0380 m^3, but at 20.0ºC, the volume expands to 0.045296 m^3 due to thermal expansion. The difference in volume is 0.007296 m^3, which translates to an additional mass of 5.33 kg of gasoline at 0ºC compared to 20.0ºC. This calculation assumes the gasoline pump is not temperature compensated; if it were, the extra gasoline would be negligible.
cutegirl1980
Messages
3
Reaction score
0
The density of gasoline is ρ = 0.730×103 kg/m^3 at 0ºC. Its average coefficient of volume expansion is α(sub v) = 9.60×10^-4 (ºC)-1. If 1.00 gallons of gasoline occupies 0.00380 m^3, how many extra kilograms of gasoline would you get if you bought 10.0 gallons of gasoline at 0ºC rather than at 20.0ºC from a gasoline pump that is not temperature compensated?
 
Physics news on Phys.org
The definition of thermal volume expansion coefficient:
\Delta V/V_0 = \alpha_v \Delta T.
 


To calculate the extra gasoline in kilograms, we need to first determine the volume of 10.0 gallons of gasoline at 0ºC and at 20.0ºC.

At 0ºC, 1 gallon of gasoline occupies 0.00380 m^3, so 10.0 gallons would occupy 0.0380 m^3.

At 20.0ºC, we need to take into account the expansion rate. Using the coefficient of volume expansion, we can calculate the increase in volume from 0ºC to 20.0ºC.

ΔV = α(sub v) * V * ΔT = (9.60×10^-4 (ºC)-1) * (0.0380 m^3) * (20.0ºC - 0ºC) = 0.007296 m^3

Therefore, at 20.0ºC, 10.0 gallons of gasoline would occupy 0.0380 m^3 + 0.007296 m^3 = 0.045296 m^3.

To calculate the extra gasoline in kilograms, we need to find the difference in volume between the two temperatures and then convert that to mass using the density of gasoline.

ΔV = 0.045296 m^3 - 0.0380 m^3 = 0.007296 m^3

Mass of extra gasoline = ΔV * ρ = (0.007296 m^3) * (0.730×103 kg/m^3) = 5.33 kg

Therefore, if you were to buy 10.0 gallons of gasoline at 0ºC rather than at 20.0ºC from a gasoline pump that is not temperature compensated, you would get an extra 5.33 kg of gasoline. It is important to note that this calculation assumes that the gasoline pump is not temperature compensated, meaning it does not adjust for the temperature of the gasoline. If the pump is temperature compensated, the extra gasoline would be negligible.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top