Calculate Laser Pulse Intensity (Optics)

mecarey
Messages
1
Reaction score
0
A laser pulse has a duration of 50 fs (50E-15 s) and an energy of 1 mJ. The laser is focused to an area of 50 micrometers square. What is the peak intensity and peak electric field at the focus?


I previously tried to do this problem with normal intensity equations using

intensity = power / area
and
power = joules/second

but I got a ludicrous answer in the range of 10^20 watts/meter square. My professor told me that my answer is wrong because it is a laser PULSE, not just a laser. Any help? I'm not too sure where to go now and my Optics book doesn't seem to cover laser pulses.

Thanks in advance - Matt
 
Physics news on Phys.org
Hi,

Hope this will help

Av Power = E/T

Peak Power = E/t

Intensity = Av Power/area

where,

E = energy of the pulse (i.e.1 mJ)
T = 1/f (f is the freq of laser pulse)
t = Duration of the pulse
area = 50 micrometers square.
 

Thread 'Please tell me where I am going wrong in this integral'

##|\Psi|^2=\frac{1}{\sqrt{\pi b^2}}\exp(\frac{-(x-x_0)^2}{b^2}).## ##\braket{x}=\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dx\,x\exp(-\frac{(x-x_0)^2}{b^2}).## ##y=x-x_0 \quad x=y+x_0 \quad dy=dx.## The boundaries remain infinite, I believe. ##\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dy(y+x_0)\exp(\frac{-y^2}{b^2}).## ##\frac{2}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,y\exp(\frac{-y^2}{b^2})+\frac{2x_0}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,\exp(-\frac{y^2}{b^2}).## I then resolved the two...
View full post »

Thread 'Direction of the magnetic field of an oscillating charge'

Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
View full post »

Thread 'Initial conditions for orbits around a wormhole'

Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
View full post »

Similar threads

Optics for High Resolution Laser Imaging: Finding the Best Path
Replies
7
Views
2K
Question about the Peak and Average Power of a Laser
Replies
3
Views
2K
A The coherence length is much longer than the manufacturer claims
Replies
10
Views
2K
Intensity of a Gaussian laser beam
Replies
5
Views
4K
Characterize a co2 TEA class 4 laser
Replies
1
Views
2K
What Are the Limits to Quasi-CW in Non-Linear Optics?
Replies
2
Views
3K
Why Is My Nd:YAG Laser Beam Quality Deteriorating?
Replies
6
Views
2K
Light beam propulsion without lasers?
Replies
25
Views
4K
Nonlinear optics: second order polarization calculation
Replies
2
Views
4K
Debug help: optical laser interference setup fails to work
Replies
8
Views
2K

Hot Threads

Recent Insights

Back
Top