Calculating Electricity Consumption: From KWhr to kW and Units

  • Thread starter Thread starter rahuld.exe
  • Start date Start date
AI Thread Summary
An engine that requires 3 kW will consume 3 kWh, equivalent to 3 units of electricity, when running for one hour. The calculation is based on the understanding that 1 kWh equals 1 unit of electricity. For example, a coffee machine rated at 2 kW running for one hour would consume 2 kWh or 2 units. The discussion clarifies that the power rating of appliances directly correlates to their energy consumption over time. This basic understanding of electricity consumption is essential for managing energy use effectively.
rahuld.exe
Messages
24
Reaction score
0
If an engine that requires 3kW to run exists... How many units of electricity will it consume in an hour... (1kWhr=1unit).

I cannot get my head around this. I am new to this topic and with no one around to help me. This might be very basic to you all but i am just a kid. Sorry about that

My solution:
It requires 3kJ for 1 sec... Therefore 3*3600kJ for 1 hour... Hence.. 3kWhrs i.e. 3 units... Is it correct?!
 
Physics news on Phys.org
The power you have written on your kitchen appliances or hoovers and what not..say 2kW for your coffee machine.
If you had it running at the power of 2kW for one hour, it means you will have spent 2kWhrs of energy. So yes, you got your answer correctly :)
 
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Power consumption in KWH of motor
Replies
7
Views
4K
Relativity: Cosmic ray proton traveling to Earth
Replies
12
Views
956
Photon Arrival Rate, Chapter 1.5 from Computer Graphics by Folly
Replies
15
Views
2K
How do I calculate electricity usage in units?
Replies
4
Views
5K
How do you Calculate Ampacity of a Conductor Geometry?
2
Replies
64
Views
5K
Power consumption costs for a malfunctioning lightbulb
Replies
12
Views
5K
Fraction within a fraction -- Units
Replies
3
Views
3K
Why the fascination with intermittent renewable energy sources?
Replies
35
Views
7K
Calculate the Heat Loss in a Hot Water Tank from a Shower
Replies
2
Views
3K
How do I calculate the rate constant units for excitation by electron impact?
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top