Calculating Force: Understanding the 1.5m Distance in Baseball Pitching Protest

  • Thread starter Thread starter Hitokiri
  • Start date Start date
AI Thread Summary
The discussion centers on calculating the force exerted by a baseball pitcher when throwing a ball straight up at 20 m/s, with a focus on the significance of the 1.5 m distance over which the force is applied. Participants explore the relationship between work, force, and distance, noting that work is calculated as force multiplied by distance. The equation W = Ek is referenced, connecting kinetic energy to the force applied over the distance. Additionally, the relationship between force, mass, and acceleration is highlighted, emphasizing the importance of considering the distance when calculating the force exerted. Understanding these concepts is crucial for accurately determining the force involved in the pitching scenario.
Hitokiri
Messages
4
Reaction score
0
Ok, i just need to verify what this question means:

A baseball pitcher throws a ball straight up into the air at a speed of 20 m/s as a protest against the umpire's calls. In the process, he moves his hand through a distance of 1.5 m. If the ball has a mass of 0.15 kg, find the force he exerts on the ball to give it this upward speed. Note that the force of gravity is acting against the motion of the ball.


Ok, so i just have a question on what the significance of the "1.5 m " distance.
 
Physics news on Phys.org
HINT: Work = Force X distance
 
I see what is going on... W= Ek so, F*s = ((m*v*v)/2) . The speed is related to the Force and the distance the force was applied over.

I new that F= m*a. so speed is related to force over time. I never really considered the distance that a force is applied over.

If Hitokiri is still visiting this forum It would be interesting to know if Tides hint was of help.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top