Calculating Forces in a Rotational System with a Wrecking Ball and Boom

AI Thread Summary
To calculate the forces in the rotational system involving the wrecking ball and boom, it's essential to identify an appropriate pivot point, typically at the base of the boom. The weight of the wrecking ball (5400 N) and the boom (3800 N) must be considered along with the angles of the support cable (32°) and the boom (48°). The equation L(5400) - Lsin(32)FT + 1/2Lsin(48)3800=0 can be used to find the tension in the cable (FT), but the length (L) can be canceled out since it appears in all terms. It's crucial to ensure the correct application of torque and forces to achieve the desired solution. Properly setting up the equations will lead to the correct calculation of the cable forces.
smith5029
Messages
8
Reaction score
0
A wrecking ball (weight = 5400 N) is supported by a boom, which may be assumed to be uniform and has a weight of 3800 N. As the drawing shows, a support cable runs from the top of the boom to the tractor. The angle between the support cable and the horizontal is 32°, and the angle between the boom and the horizontal is 48°.

i'm drawing a blank really, i don't know what to use as my pivot point.
i had L(5400) - Lsin(32)FT + 1/2Lsin(48)3800=0
then i solved for FT but it was wrong, can you help me, or show me where to go
 
Physics news on Phys.org
the question wants to know what the force of the cables question is, and the length isn't defined but you can cancel it out right?
 
You posted in college help already. Don't double post.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top