Calculating Half-Life from Radioactive Decay

AI Thread Summary
To find the half-life of a radioactive material that has decayed by 60% in 25 years, it is essential to recognize that 40% remains. The appropriate formula to use is derived from the exponential decay model, specifically X = C(1/2)^(t/T), where C is the initial amount and T is the half-life. By setting up the equation 0.4C = C(1/2)^(25/T) and simplifying, the constants cancel out, allowing for the calculation of T. The conclusion is that the half-life must be less than 25 years, given that more than half of the material has decayed in that time frame. This method effectively provides a solution to the problem.
sklotz
Messages
7
Reaction score
0

Homework Statement



After 25 years, 60% of a radioactive material decays. What is the half-life?

Homework Equations



I used a ratio of 25/.60= x/.50

The Attempt at a Solution



I also tried this ratio as 25/.40= x/.50 I am not really sure what equation I should be using but this ratio set up isn't getting me the correct answer
 
Physics news on Phys.org
Decay is an exponential dcay. That is:

N(t) = N(t0)e-k(t-t0)

where N(t) is the amount at some time t, N(t0) is the amount at time t0, and k is the decay constant.
 
Ok so I tried using this equation but I still got the problem wrong. I used these values:
N(t)= .6 N(t0)=1 t=25 and t0= 0. I then solved the equation for the decay constant and got: k=.020433025. From my book I found an equation that related the half-life and the decay constant. The equation I used was half-life= ln2/k. from this I got 33.9228861414. This is similar to the answer I got from doing the ratios, and was wrong. I only have one more attempt for full credit and I don't know exactly where I went wrong.
 
Note that N(t) represents the amount of radioactive substance that still remains at time t. So, if 60% has decayed, what % remains?

If you think about it, the half-life should be less than 25 years since more than half has decayed at 25 years.
 
Because you are talking about half life, in particular, I would use the formula (equivalent to the "e" formula TSny gives) X= C(1/2)^{t/T} where C is the initial amount and T is the half life. (You can see that if t=0, C(1/2)^{0/T}= C and if t= T, C(1/2)^{T/T}= C/2.)

If 60% has decayed then 40% is left so .4C= C(1/2)^{25/T}. The two "C"s will cancel leaving an equation to solve for T.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top