Calculating Magnetic Field Between Coaxial Circular Coils

AI Thread Summary
To calculate the magnetic field halfway between two coaxial circular coils, each carrying 4.0 A, the total magnetic field must account for contributions from both coils. The initial calculation only considered the field from one coil at a distance of 20 cm, which is incorrect. The correct approach requires summing the magnetic fields from both coils at the midpoint, taking into account their vector directions. The formula used needs adjustment to reflect the contributions from both coils. Properly applying these principles will yield the correct magnetic field value.
Curious314
Messages
31
Reaction score
0

Homework Statement


Two coaxial circular coils of radius R = 15 cm, each carrying 4.0 A in the same direction, are positioned a distance d = 20 cm apart, as shown in the figure. Calculate the magnitude of the magnetic field halfway between the coils along the line connecting their centers. (μ0 = 4π × 10-7 T ∙ m/A)
pregunta 7 dibujo.jpg


Homework Equations



eciacion pregunta 7.jpg


The Attempt at a Solution



so:

B= [(4*∏*10-7)(4.0)(0.152)]/[2*(0.152+0.22))3/2]

which is = 3.62 x 10-6

not near any of the options.
Is this a very wrong approach?

Thanks!
 
Physics news on Phys.org
Hi! :smile:

You are only considering the field due to one of the coil at a distance 20cm from its center. But you are asked the total magnetic field due to both, halfway from their centers! So fields from each of the loop will add. Remember to check the field direction due to each before adding, as it is a vector.
 
Thank you!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top