Calculating Maximum Height in Projectile Motion for an Olympic Long Jumper

  • Thread starter Thread starter atbruick
  • Start date Start date
  • Tags Tags
    Projectile
AI Thread Summary
An Olympic long jumper with an 8.5 m jump and an initial horizontal velocity of 9.7 m/s is being analyzed for maximum height. The jumper's time in the air is calculated to be 0.88 seconds, but there is confusion regarding the initial vertical velocity (Vy initial) and its impact on height calculations. The incorrect assumption that Vy initial is zero leads to errors in the height calculation, prompting a reevaluation of the approach. Attempts to calculate maximum height using various values for Vy initial, including 18 m/s, yield incorrect results. The discussion emphasizes the need for accurate initial velocity values and proper application of kinematic equations to determine maximum height.
atbruick
Messages
20
Reaction score
0

Homework Statement


An Olympic long jumper is capable of jumping 8.5 m. How high does he goes? (Assuming he lands standing upright). His initial horizontal velocity is 9.7 m/s.

Before it asked his height, I found that the time he is in the air is 0.88 seconds.


Homework Equations


Y=Yinitial+Vyinitial*t-.5at^2


The Attempt at a Solution


Since Y is the maximum height, I just tried plugging in numbers for the symbols in the rest of the equation. Yintial was 0, Vyintial was 0, t was 0.44 because max height is in the middle, and a is -9.80m/s2. I got an answer of 9.5, which was wrong. I have a feeling I'm substituting incorrectly but can't figure out what.
 
Physics news on Phys.org
The assumption that Vy initial is zero is wrong. If it was zero, then the maximum height would be zero.

It seems to me you would have to use Vf = Vi + at to find Vi before doing your vertical distance calc.
 
Ok, so hoping my calculations for Vy initial are correct, I got 18 m/s, then I tried finding the maximum height and got 20 meters with time as 0.88, which was incorrect. So I thought I should put in time as 0.44 because that is when he will be at maximum height and got 8.9 and that was incorrect too. Not sure what to do now.
 
I think 18 is much too large for Vy initial. It would be more helpful if you showed what you did than what the answer was. I used
Vf = Vi + at
-Vi = Vi -9.8*t
2*Vi = 9.8*0.88
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top